Is it possible to connect a laptop to an old TV. Step-by-step instructions for connecting a laptop to a TV. TV software setup

Is it possible to connect a digital set-top box this way?

Thank you for the video. I watched it in one go. When I first set it up, it made me laugh 😄, and then feel nostalgic. Thanks again. Like 👍

video input (AV) is added to this TV using two transistors

Cool, you can sneak the necessary information into your children by connecting it anonymously. Not the nonsense they show on TV.

why is all this unclear?

Such televisions are preserved only in the museum

Have you tried expanding the screens?)

Fun, but not practical.

Well, why hang a microphone on your Adam's apple? Swallowing saliva is, of course, good to listen to, but it somehow irritates the slang.

Do you also feel nostalgic while no one is looking? =))).

How can the text be read on such a small screen?

The Spectrum must be connected! Eh, youth)))

Thanks, this is not relevant.

let's see the videos, everything will trample on you

Shoot some more! Note: Ali sells a VGA RF converter right away for the same money or cheaper.

And still there is a slight inpulse lag. For emulating old retro games, especially high-energy games like Contra, this is not acceptable, and for games in which reaction accuracy is a priority. And so, a very informative video.👍👍👍

How to make a synchrophasatron from matches, shit and acorns. For what???

No, this is all clear, but what’s the point??? Connect MODERN DEVICES to scrap metal? And it's good for that. I don't understand what's the point? We don’t live on a desert island))) This reminded me of Soviet times))) Hook of the Vidi-Kov and the Dandy))

You can take the latest converter from Shogi

Triple monitor

Any fool can do this. And if you make an adder with RGB, i.e. achieve a composite signal and feed it to the variable resistor motor for adjusting the contrast relative to the outermost terminal with a potential close to ground?

Please tell me, 5 volts are supplied to the converter, but what should the current strength be, 500mA-1a-2a-or 3 amperes?

Was this UHF high-frequency adapter (HF modulator) in a green blister? In our system, K modulates (sound +6.5 MHz), I thought it was only for G.... You didn’t switch anything there?

Thank you very much again! You helped out my "project" :)

The large screen allows you to completely immerse yourself in a movie or game. We have described all the possible ways to connect a laptop to a TV.

So, have you decided to transfer the image from your laptop screen to your TV screen? Then you should know how to do it correctly. There are a total of four ways to connect a laptop to a TV, which depend on the connectors on the devices. VGA is present on almost all older models, you won’t find DVI almost anywhere anymore, S-Video and HDMI are connectors installed on fairly high-quality and expensive devices. You can also transfer images using Wi-Fi.

How to connect a laptop to a TV via HDMI

[[("type":"media","view_mode":"media_large","fid":"18","attributes":("alt":"","class":"media-image"" height":"300","typeof":"foaf:Image","width":"450"))]]

1. First, we connect both of our devices using a cable;
2. Using the remote control, we turn on the HDMI viewing mode on the TV, but if there are several ports, then select the one to which the cable is connected, that is, port 1, 2 or 3;
3. We turn on the laptop, after loading the operating system we need to go to the display settings and select the desired display type, you can also increase or decrease the area of ​​the laptop desktop to the size of your TV screen.

How to connect a laptop to a TV via VGA

[[("t[[("type":"media","view_mode":"media_large","fid":"19","attributes":("alt":"","class":"media -image","height":"360","typeof":"foaf:Image","width":"480"))]

1. We examine the TV for the presence of a VGA or SKART connector;
2. Of course, the simplest option is if both the laptop and the computer have VGA sockets. Then you just need to connect both devices with a VGA-VGA cable and set “Output to external display” on the laptop, which can be found in “Display Properties”. But what to do if the laptop has VGA connectors and the TV has SKART connectors? Everything is just as simple here: we purchase a special VGA-SKART cable from a large store, connect both devices, and perform the same actions on the laptop as when connecting VGA-VGA. Don’t forget to set the video source using the remote control;
3. And here, at the third step, everyone who displays an image from a laptop on a TV screen asks the question: “What to do, because there is no sound?” What can you answer here? We purchase a cable for connecting external acoustics (two “tulips”, sold absolutely everywhere) and organize the sound supply through this same adapter.

How to connect a laptop to a TV via Wi-Fi

[[("type":[[("type":"media","view_mode":"media_large","fid":"20","attributes":("alt":"","class": "media-image","height":"329","typeof":"foaf:Image","width":"480"))]I can transfer a video signal from a laptop to a TV, you can also use Wi-Fi, everything is done very simple. We will need a TV with the ability to connect to a Wi-Fi router, the router itself, a laptop and a program such as Windows Media Center or any similar one.

1. We connect the TV to the router, make sure that the TV is really connected and can work;
2. Now we connect the laptop to the router, and also make sure that the connection is working;
3. Open Windows Media Center Extender and connect it to the TV.

Ready! Now you simply transfer files to Media Center and the program “runs” them on the big screen.

But what if you own an Apple TV? Then you'll need an Apple TV, a device that lets you stream video on your TV screen. The set-top box is connected to the TV using a special cable, then connected to the home network via Wi-Fi. That's it, such a simple system will help you watch videos on the big screen.

• Don’t be afraid to connect several TVs to one laptop at once, because modern video cards are designed in such a way that they are capable of transmitting video to several large screens at once without any noticeable drawbacks;
• Don’t worry if suddenly the laptop display goes out while transmitting the picture, the video will still be transmitted to the TV. The thing is that the laptop simply went into power saving mode (this happens about 15-20 minutes after stopping using the laptop), especially if this function is not disabled in the settings;
• Also, inexperienced users often encounter the problem of switching the video source on the TV. This is done using the remote control, on which you need to find the button responsible for this action. It can be called either “TV/Video” or “input.” Press the found button several times until the image from the laptop appears on the TV screen;
• When purchasing a cable to connect your laptop and TV, always pay attention to the thickest cable. Even though it costs much more than thin ones, the quality and speed of information transfer will be much higher, and the risk of image distortion will disappear;
• If suddenly you have the opposite desire, that is, to record TV shows on the laptop’s hard drive, then this is very easy to do: just install the Slingbox TV program on a laptop with Windows 7;
• Feel free to use several adapters at once if necessary. Contrary to popular belief, not a single adapter reduces the characteristics of information transfer from one device to another, it only corrects the data flow, optimizing it for the required socket.

Unlike a wireless connection, connecting a laptop to a TV via a cable ensures uninterrupted data transfer, which is especially convenient for synchronizing actions between devices while playing a computer game or surfing the Internet. But different signal types - digital or analogue - can have a significant difference in picture and sound quality.

It is considered the most preferable. This state-of-the-art interface guarantees the highest digital signal quality.

Older TVs don't have an HDMI connector, so they have to use other types of connections. Below we will tell you how to connect a laptop to a TV via a VGA cable, S-Video, tulips (RCA) and other common interfaces.

Attention! All cable connections should be made with the power to the TV and laptop turned off to avoid burnout of the ports.

Connecting a laptop to a TV via VGA

This interface, familiar to all PC users, transmits only analog video and is not intended for audio. This type of connector belongs to the D-Sub family, which for many years was the most popular in computer technology and is still widely used today.

To connect a laptop to a TV via a VGA cable, you must:

Sound output

With this type of connection, the sound is reproduced through the laptop speakers or external speakers connected to it. You can also transfer sound from the laptop's audio output to the TV using a separate cable.

Connecting a laptop to a TV via DVI

DVI provides transmission of a digital, i.e., higher quality video signal, but like VGA it does not support sound. If there is no DVI port on your laptop, you can use a VGA-DVI adapter.

Depending on the available screen resolution, frequency and number of channels, DVI connectors are divided into several types, but these two are the most relevant:

• DVI-D Dual Link. It has two digital channels, supports resolution from 1920*1080 to 2560*1600 and frequency from 60 to 120 Hz. Suitable for large screen TVs.
• DVI-I Dual Link. It has one analog and two digital channels, which allows you to transmit 3D images to the TV screen.

Comparative characteristics of various types of DVI and the appearance of the connectors are given in the table:

You can connect your laptop to your TV via DVI according to the instructions described for VGA. Only DVI must be selected as a signal source in the TV settings.

Sound output

Like VGA, DVI does not support audio transmission. To output sound to a TV, you should purchase a MiniJack cable with standard 3.5 mm plugs, which are connected to the corresponding connectors of the laptop and TV. There is also a DVI cable combined with a minijack.

Connecting a laptop to a TV via “tulips”

An RCA cable, more popularly known as a “tulip” or “bell” cable, is standard for most TV models. However, such an interface has not been used in modern laptops for a long time. The cheap VGA-RCA adapters on the market are essentially useless due to the fundamental difference in the type of signal. Therefore, before connecting a laptop to the TV via “tulips”, you should purchase a special converter that converts digital data from the laptop into an analog signal acceptable for the old TV.

To connect a laptop to a TV via RCA, you need to:

1. Connect the HDMI cable from the laptop connector to a similar connector on the converter.
2. Connect the audio and video inputs of the TV and converter with “tulips”.
3. Set up your laptop and TV according to the instructions described above (for VGA). Specify AV or “Analog” as the signal source.

Sound output

With this type of connection, analog audio is transmitted to the TV speakers via a composite RCA cable.

Connecting a laptop to a TV via S-Video

The component analog S-Video interface is designed to transmit a separate video signal. The image quality is quite low, so this connector is used extremely rarely, although it is present on many TVs and laptops.

Connecting a laptop to a TV via S-Video is similar to all described interfaces, but you should specify “Component” as the signal source.

Sound output

This interface does not support audio signal transmission. If you have a SCART TV connector, you can transfer sound from your laptop to your TV using a special adapter that combines inputs for S-Video and a composite RCA cable:

Problems outputting image or sound from a laptop to a TV