Mobile phone alcatel one touch pop star. Alcatel smartphones Alcatel. Different sensors perform different quantitative measurements and convert physical indicators into signals that a mobile device can recognize
Detailed information about a budget-level gadget from a renowned manufacturer will be described in detail in this review material. We will look at its strengths and significant disadvantages, and reviews will also be provided. Pop Star 5022D - it is this economy class gadget that is the hero of this article.
Smartphone niche
Be that as it may, it is the niche of entry-level gadgets that stands out from the rest of the market for these mobile products due to its increased level of competition. In addition to well-known manufacturers, in the economy class smartphones you can also find completely unknown manufacturers of such equipment from China. It is to the first group of devices that reviews include the hero of this review. Alcatel One Touch Pop Star 5022D is an entry-level phone. This positioning is primarily indicated by the model’s capacity of RAM and built-in storage, camera parameters and degree of autonomy. Also, its cost leaves no doubt. But this does not mean that this is a bad mobile device. Quite the contrary - this is one of the best representatives of famous digital technology manufacturers in the entry-level smartphone segment.
Device configuration. Its advantages and disadvantages
The list of such components and, of course, accessories is included in the boxed version of the Alcatel One Touch Pop Star 5022D:
The instructions (and in several of the most common international languages, including Russian) and the warranty card with an expanded list of service centers are a complete set of documentation for this gadget.
A smartphone and 2 additional covers for the back panel (somewhat reminiscent of the once successful Corby touch phone from Samsung).
A familiar interface cord with a dual purpose - for charging the battery or synchronizing a mobile device with any computer.
A modest entry-class stereo headset with headphones in the form of “tablets”.
Charger with 2A output.
Rechargeable battery with a nominal capacity of 2000 mAh.
On the one hand, this device seems to have good equipment. But it also has significant disadvantages. One of them is the lack of a protective film on the front panel. The second disadvantage is the lack of a memory card in the list given earlier in the text.
Gadget design
In this case, reviews indicate very interesting and unusual design solutions. Alcatel One Touch Pop Star 5022D is a monoblock already familiar to everyone. Its dimensions are 141 mm by 71.5 mm with a thickness of 8.6 mm. Well, the weight of this device is 145 g. As expected, the main element of the front panel in this case is the display. The length of its diagonal is equal to the average by today's standards - 5". The control panel in this case is unusual, as for other devices of this brand. If earlier it consisted entirely of touch buttons, now it is combined. It consists of 2 touch buttons with backlit and one mechanical. This design is somewhat reminiscent of the proprietary design of smartphones from Samsung. But the mechanical button itself is round on this gadget and, due to this design solution, it is more reminiscent of outdated mobile devices from Apple. Therefore, in terms of the design of the front panel, this The device intertwined the features of two famous and most famous manufacturers of such products. Grouped above the display are: an earpiece, a front camera hole for selfies and video communication, and, of course, camouflaged circles of sensor elements. On the bottom edge of the smart phone there is a micro standard port -USB and a miniature hole for the main conversation microphone.On the opposite edge of the gadget there is a 3.5 mm audio port and another miniature hole for an additional microphone. The main task of the latter is to remove extraneous noise from the conversation. On the left side of the device there is a lock button, and on the right there is a volume control system. The back cover displays: a loud main speaker, a touch element of the main camera and its illumination based on a single LED.
CPU
A typical CPU for entry-level devices is used in the Alcatel One Touch Pop Star 5022D. The characteristics of its hardware are really modest. Its semiconductor crystal includes 4 cores with A7 architecture. Its undeniable advantage is energy efficiency, and performance and speed in this case fade into the background. Its clock speeds at best can reach 1.3 GHz. The silicon crystal of this CPU itself is produced using a technical process with standards of 28 nm. Of course, this is not an advanced technology for the production of semiconductor chips today, but due to its use it is possible to reduce the cost of the CPU. And this, in turn, comes to the fore in the niche of budget devices. This central processor can cope perfectly with the simplest and most common tasks - reading literature, playing audio recordings or videos, surfing various Internet resources. Even the simplest and average toys in terms of the level of requirements for the gadget’s hardware resources will definitely work in this case. The Pop Star 5022D smartphone just won't be able to handle the most complex and demanding 3D games. Its performance in this case will certainly not be enough. Another disadvantage of this processor product is the lack of support for 64-bit calculations. Now the transition to just such software is in full swing, and it certainly will not function on this phone. But this is not a problem of this particular device, but of the entire niche of budget-level devices.
Mobile device GPU
A modest model of the graphics accelerator is installed in the Alcatel One Touch 5022D Pop Star Slate. In this case we are talking about Mali-400 MP2. The area of its semiconductor crystal is 4.7 mm 2, and it is manufactured according to 28 nm standards. In turn, the amount of graphics memory is 128 KB. The number of geometric data processing units in this model is 1, and the number of pixel processors is 4. The clock frequency of this product is 400 MHz. Of course, this solution certainly does not stand out from similar products due to its outstanding performance. But its main task is to free the processor part of the smartphone from processing graphic information, and this is exactly what this accelerator does flawlessly. Its capabilities will certainly not be enough to perform demanding software tasks. This semiconductor crystal can handle the rest of the application software without any problems.
Gadget screen. Its characteristics
The screen in this device is quite good in terms of technical parameters. The Alcatel One Touch Pop Star 5022D phone is based on a display based on an IPS matrix. Its colors are bright and saturated, and the quality of the output image is not satisfactory. The picture in this case is displayed in HD format, or, as it is also called, 720p. That is, the resolution in this case is 1280x720, and the diagonal length is exactly 5”. If you calculate the pixel density in this case, it turns out that its value is 294ppi. This is quite enough to ensure that the image displayed on the display is grain-free.
Local subsystem for data storage and installation of application programs
Alcatel One Touch Ot 5022D Pop Star has only 1 GB of RAM. About 600 MB of them will be occupied by system software after the smartphone has finished loading. In this case, the user can count on 400 MB. This is quite enough to run several undemanding programs or one resource-intensive task. The total size of the integrated storage is 8 GB. The system software for this device takes up 3.5 GB. The user can already use the remaining 4.5 GB for his own needs: either store files or install application software. This device also has a separate slot for installing additional storage. The size of the latter can reach an impressive 32 GB.
Cameras
A typical situation with taking photos and recording videos, as for an entry-level mobile device, is in the Alcatel Touch Pop Star 5022D. The camera on the back cover has an 8 MP sensor element. Also at the software level, technology such as autofocus is implemented here. Its capabilities when shooting in the dark or in low light levels are enhanced by backlighting based on a single LED. The photo quality of this camera is standard, as for a gadget of this class. The video in this case is recorded in 1080p format. Its quality level, as in the case of photography, is average. There is also a second camera in the Alcatel One Touch Pop Star 5022D. Her photos come out very, very good. It has a 5MP sensor that is standard by today’s standards, and this is quite enough for “selfies”. Well, for video communication this is generally more than enough.
The situation with autonomy. Battery
The Alcatel One Touch Pop Star 5022D comes with a removable 2000 mAh battery. The battery is probably one of the weaker points of this well-balanced entry-level product. The maximum operating time on one charge for this device, even in the most economical mode, will not exceed 2 days. This is influenced by both the 4-core central processor and the large screen. In reality, this gadget will have to be charged daily with rare exceptions. The best solution to this problem is to purchase an external additional battery. Nowadays such accessories can be purchased at a very modest price. The capacity of such a battery can reach a fantastic 10,000 mAh. This will allow the owner of such a smartphone for 5-6 days not to think about the battery level of his phone and use it to the maximum.
Methods of transmitting information
All the most popular formats for transmitting information are supported by the Alcatel One Touch Pop Star 5022. Moreover, this applies to both wired and wireless interfaces. This list includes the following:
Alas, this device cannot boast of support for LTE cellular networks (or as they are sometimes called 4G). Therefore, the owner of such a smartphone has to immediately forget about speeds of 150 Mbit/sec. But there is support for 3G networks. However, depending on the network of the cellular operator, the speed may vary significantly. In a regular 3G network with a single carrier, the speed can reach 7.2 Mbit/s. If the number of carriers increases to two, then the speed will increase and amount to 42 Mbit/sec and this will already be a 3G+ network. Well, if you have 3 carriers, you can theoretically get 63 Mbit/s, and it will still be the same 3G+ cellular network. This gadget also boasts the presence of 2G networks or, as they are sometimes referred to, GSM. With such coverage, you can count on a maximum of 500 kbit/sec.
An almost complete list of existing Wi-Fi standards is in the technical specifications of this gadget. Only the most recent “ace” is missing from this list. But due to backward compatibility, this device will be able to function quite normally even with such a router.
Another main method of wireless data transfer is Bluetooth. It is perfect for those cases when you need to connect wireless headphones to your smartphone or exchange small photos with a friend.
All the main and most popular navigation systems are included in this smartphone. This is both GPS and A-GPS. In the first case, both the American navigation system of the same name and its domestic analogue in the form of GLONASS are immediately supported at the software level. It should also be noted that in case of navigation using A-GPS, you will need an Internet connection, without which this method will not be able to function at all.
The main wired data transfer method is micro-USB. It allows you to connect this gadget to any computer and use it as a flash drive, multimedia device or even a webcam.
But the 3.5 audio port allows you to organize the output of an audio signal from this device to any wired speaker system.
Software component
The system software in Alcatel One Touch Pop Star 5022D is Android. Its current firmware version is currently 5.1. It is also unknown whether the manufacturer has plans to release more recent modifications of the system software. Most likely, the owner of such a gadget will have to use what is currently available and should not expect any updates. The rest of the set of pre-installed software is typical. These include programs from the developer’s company, software integrated into the operating system, and mini-applications for social networks.
This is the official instruction for Alcatel One Touch POP STAR 5022D in Russian, which is suitable for Android 5.1. If you have updated your Alcatel smartphone to a more recent version or “rolled back” to an earlier one, then you should try other detailed operating instructions that will be presented below. We also suggest that you familiarize yourself with the quick user instructions in question-answer format.
Alcatel official website?
You have come to the right place, because all the information from the official Alcatel website, as well as a lot of other useful content, is collected here.
Settings-> About phone:: Android version (a few clicks on the item will launch the "Easter egg") ["Out of the box" Android OS version - 5.1].
We continue to configure the smartphone
How to update drivers on Alcatel
You need to go to "Settings -> About phone -> Kernel version"
How to enable Russian keyboard layout
Go to the section "Settings->Language and input->Select language"
How to connect 4g or switch to 2G, 3G
"Settings-> More-> Mobile network-> Data transfer"
What to do if you turned on child mode and forgot your password
Go to "Settings-> Language and keyboard-> section (keyboard and input methods)-> check the box next to "Google voice input"
.png)
Settings->Display:: Auto-rotate screen (uncheck)
How to set a melody for an alarm clock?
.png)
Settings->Display->Brightness->right (increase); left (decrease); AUTO (automatic adjustment).
.jpg)
Settings->Battery->Energy Saving (check the box)
Enable display of battery charge status as a percentage
Settings->Battery->Battery Charge
How to transfer phone numbers from a SIM card to the phone memory? Importing numbers from a SIM card
- Go to the Contacts app
- Click on the "Options" button -> select "Import/Export"
- Select where you want to import contacts from -> “Import from SIM card”
How to add a contact to the blacklist or block a phone number?
How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)
- You can contact the operator
- Or read the instructions for
How to set a ringtone for a subscriber so that each number has its own melody
Go to the Contacts application -> Select the desired contact -> click on it -> open the menu (3 vertical dots) -> Set ringtone
How to disable or enable key vibration feedback?
Go to Settings-> Language and input -> Android keyboard or Google keyboard -> Vibration response of keys (uncheck or uncheck)
How to set a ringtone for an SMS message or change alert sounds?
Read the instructions for
How to find out what processor is on One Touch POP STAR 5022D?
You need to look at the characteristics of One Touch POP STAR 5022D (link above). We know that in this modification of the device the chipset is MediaTek MT6580, 1300 MHz.
.png)
Settings->For Developers->USB Debugging
If there is no "For Developers" item?
Follow the instructions
.png)
Settings->Data transfer->Mobile traffic.
Settings->More->Mobile network->3G/4G services (if the operator does not support, select only 2G)
How to change or add input language on the keyboard?
Settings-> Language and input-> Android keyboard-> settings icon-> Input languages (check the box next to the ones you need)
Mobile devices from Alcatel have not previously been particularly popular. After a while, the situation changed little, and the company decided to release a model that would be in demand. Thus, Alcatel One Touch POP 3 5025D was presented with attractive characteristics and an equally interesting price. Of course, this is not the first budget smartphone model from Alcatel, it’s just that this particular model is capable of arousing the interest of a user who expects to purchase a good smartphone within $100. Alcatel POP 3 appeared on store shelves in the fall of 2015, and is sold at a price of 110 USD (price indicated at the time of writing the review).
The appearance of the device is simple and concise, but corresponds to modern trends. The body is made of plastic and assembled well. Some users note that the volume rocker and power button are located very well, they are easy to reach, given the dimensions of the case due to the large display.
Specifications Alcatel One Touch POP 3 5025D
The technical capabilities of a smartphone correspond to the minimum required to solve most problems of modern mobile device users.
CPU
The processor is a 4-core MediaTek MT6580 (1.3 GHz). Video chip - Mali-400 MP2. In operation, the smartphone demonstrates good performance, which is enough to run applications quickly. Almost all games that require hardware can run, however, for smooth operation it is necessary to reduce the picture quality. For example, GTA: SA runs stably at medium graphics settings. In the synthetic AnTuTu test, the Alcatel POP 3 5025D scores 20 thousand points.
Memory
The amount of RAM is 1 GB. At this price, you can’t expect anything more at the moment; however, this volume is enough for not particularly demanding users. The volume of the main drive for storing data and installing applications is 8 GB. More than 4 GB is available for use - there is more than enough memory for applications, and there will be room for “heavy” games. Support for memory cards up to 128 GB is declared.
Battery
A 2910 mAh battery allows the smartphone owner to stay connected all day. Despite the fact that the device does not belong to the “long-livers” category, most owners speak positively about its autonomy. It is also noted that Alcatel POP 3 charges faster than other smartphones with a battery of similar capacity.
The charge is enough for one day of normal use, and about 5 hours of continuous video playback. Enabling the energy-saving mode allows you to extend the device's standby time to 3-4 hours.
Camera
You won't be able to take serious pictures using the device. The 8 MP camera allows you to take more or less passable pictures in good daylight. In other cases, everything is sad. Autofocus is slow, even very slow. The video is recorded in FHD (1080p) format, and its quality is also not particularly stellar. The camera cannot be added to the list of shortcomings, since it fully corresponds to the price category of the smartphone.
But the 5 MP front camera allows you to take not the worst portrait photos, and is well suited for video conferencing.
Display
The 5.5-inch display is the main pride of the Alcatel POP 3 5025D smartphone. The IPS matrix, bright colors and good viewing angles successfully complement the decent resolution of 1280 x 720. Of course, the display is not protected by damage-resistant glass, does not have anti-glare and other “premium” properties. However, it performs its functions unquestioningly and is well suited for web surfing, watching videos, playing games, etc.
Networking capabilities
A smartphone with 2 SIM cards can operate in 2G/3G networks. Has support for GPS navigation and A-GPS technology. Can be used as a navigator, since it finds satellites quite quickly.
Sound
The main speaker sound is relatively good and the sound is quite loud. As for the earpiece speaker, some users may have a model with a quiet or echoy speaker. However, the percentage of such cases is small; it is necessary to test the device before purchasing.
operating system
Alcatel POP 3 runs on Android version 5.1 Lollipop. Apart from the fact that the OS is quite fresh, there is nothing remarkable in the software part.
Pros and cons of Alcatel One Touch POP 3 5025D
pros
- Display. Perhaps the only pride of a smartphone;
- The price is reasonable and, in principle, corresponds to the capabilities of the device.
Minuses
- The speaker may not be loud enough in some units;
- The microphone has low sensitivity. You will have to speak louder than usual so that the interlocutor can hear clearly;
- The proximity sensor does not always work correctly, therefore, when placing the phone to the ear, the user runs the risk of involuntarily pressing something.
Our review of the Alcatel POP 3 smartphone
As it turns out, the smartphone is “not without sin.” Judging by the review, it has some shortcomings that may put off a potential buyer, however, these shortcomings are not critical for everyone. The disadvantages of a smartphone concern mainly the part that is associated with telephone conversations, so it is not suitable for frequent and important conversations. However, the Alcatel POP 3 5025D is a good choice for those who need a budget device with a large display and decent performance.
You will also like:
Alcatel OneTouch Pixi 3 (4.5) 4027D: review of an affordable smartphone
Review of the Huawei Honor 4c smartphone: a budget phone with a good camera
Eldest among the youngest
The Alcatel Pop 4S smartphone is now considered the flagship of its line, but the Pop line itself is positioned as budget and affordable, while the Idol line is premium for TCL/Alcatel. As a result, Alcatel Pop 4S turned out to be far from the cheapest of the manufacturer’s smartphones, and what it can offer its owner and whether it makes sense to pay attention to this model, you will learn from our review.
Main characteristics of Alcatel Pop 4S (5095K)
- SoC MediaTek Helio P10 (MT6755M), 8 cores ARM Cortex-A53: [email protected] GHz and 4@1 GHz
- GPU ARM Mali-T860 MP2 @550 MHz
- Operating system Android 6.0
- Touch display IPS 5.5″, 1920×1080, 401 ppi
- Random access memory (RAM) 2 GB, internal memory 16 GB
- Support Micro-SIM (1 pc.), Nano-SIM (1 pc.)
- MicroSD support up to 64 GB
- GSM/GPRS/EDGE networks (850/900/1800/1900 MHz)
- WCDMA/HSPA+ networks (850/900/1900/2100 MHz)
- LTE Cat.4 FDD Band 3, 7, 8, 20 networks
- Wi-Fi 802.11a/b/g/n/ac (2.4 and 5 GHz), Wi-Fi Direct
- Bluetooth 4.2, NFC
- GPS, A-GPS, Glonass
- USB 2.0, OTG
- Camera 13 MP, autofocus, f/2.4, video 1080p
- Front camera 5 MP, f/2.0, fixed. focus, flash
- Proximity sensor, lighting sensor, magnetic field sensor, fingerprint sensor, accelerometer, gyroscope
- Battery 2960 mAh, non-removable
- Dimensions 152×77×8 mm
- Weight 153 g
Appearance and ease of use
Alcatel Pop 4S has a rather simple design; a device for 16 thousand rubles could, frankly speaking, look more expensive. The first thing that comes to mind is the faceless black plastic smartphones of Chinese OEM manufacturers from three to four years ago. The device looks inexpressive and cheap. Perhaps this is due to the dull matte black color and thin silver side bezel, glittering with chrome.
Most of the body is formed by a cover made of thin and flexible plastic. The lid completely covers the entire frame of the case, the side buttons are attached directly to it. The lid is matte, with a polished effect, but fingerprints still remain clearly visible on its surface.
The size of the smartphone is typical of large 5.5-inch devices; its outlines and dimensions cannot be called elegant. The side edges have clearly defined straight ends, the sides are slightly narrowed due to the sloping edges of the back cover. The ends are surrounded by a thin and shiny chrome rim, but there is no real metal here, and this rim does not separate the parts of the body, but is simply applied to the plastic casing. There is a suspicion that these shiny strips will peel off pretty quickly.
 |
 |
The cover can be easily removed with your fingers; there is a special recess for engagement. Inside there are two separate slots for Micro-SIM and Nano-SIM cards and one slot for a microSD memory card up to 128 GB. The memory card can be mounted so that applications can be installed on it; this requires formatting and loss of previous data. The battery, despite the removable case cover, cannot be replaced independently.
The camera module on the back wall of the smartphone protrudes beyond the surface of the case, causing the device lying on a hard surface to sway when you touch the screen. The flash consists of two multi-colored LEDs, it is quite bright and can be used as a flashlight.
The main speaker is installed right there, on the back of the case, that is, the sound is directed in the opposite direction from the user, which is not the best option. In addition, the sound of a lying smartphone is muffled by the surface of the table.
The front panel of the Alcatel Pop 4S is covered with flat transparent glass without fashionable sloping edges or tinting. Below the screen there is a mechanical hardware key with a fingerprint scanner embedded in it. The scanner is quite sensitive; there are no complaints about its response time or recognition quality. You can bring your finger to the sensor at any angle. The button under the scanner platform is mechanical; it functions to return to the home screen. The other two buttons, located on either side of it, are touch-sensitive and have a white backlight.
In addition to sensors, in the upper part above the screen there is also such a useful element as an LED event indicator. The diode, however, is very small, barely noticeable; it shines as a dim, small, milky dot in the left corner, notifying you about the charging status and incoming messages. There is also a window for its own front-facing flash for the selfie camera.
The side buttons are swapped: most modern smartphones have the power key on the right side closer to the middle, and the rocker or volume keys are located above it. Here everything is the other way around, so when switching from other smartphones, confusion arises. The volume usually has to be adjusted much less often than using the lock key, but its rocker is located here under the thumb of the right hand, so the volume button is pressed more often, sometimes unintentionally, and you have to reach for the unlock button every time. However, the use of a fingerprint sensor to unlock a smartphone and the double-tap screen blanking function, on the one hand, and the use of volume buttons to turn pages in a browser and e-reader, on the other hand, can significantly change the nature of the user’s interaction with the device and his preferences in location buttons
The Micro-USB connector was installed not in the middle of the bottom end, but closer to the edge. It supports connecting flash drives and other devices in USB OTG mode. On the other edge you can find the hole for the speaking microphone.
The hole for the second, auxiliary microphone is located on the opposite end; the smartphone is equipped with a noise reduction system, for which this additional microphone is used. The 3.5 mm headphone jack is embedded here, in the top end.
As for colors, in Russian stores the model is most often found in black, the most nondescript version, but in general there are brighter colors of Alcatel Pop 4S in nature.
Screen
Alcatel Pop 4S is equipped with an IPS touch display with flat protective glass without sides or sloping edges. The physical dimensions of the screen are 68x121 mm, diagonal - 5.5 inches, resolution - 1920x1080 pixels, pixel density is approximately 401 ppi. The width of the frame around the screen on the sides is about 4 mm, in this regard the smartphone looks simple and does not set any “frameless” records.
The display brightness can be adjusted manually or automatically adjusted based on the ambient light sensor. The AnTuTu test diagnoses support for 5 simultaneous multi-touch presses. When you bring the smartphone to your ear, the screen is adequately blocked using the proximity sensor. The functions of turning the display on and off by tapping on the glass constitute the only set of gestures that the hero of the review can use. These features are manually enabled in the corresponding settings menu.
 |
 |
A detailed examination using measuring instruments was carried out by the editor of the “Monitors” and “Projectors and TV” sections Alexey Kudryavtsev. Here is his expert opinion on the screen of the sample under study.
The front surface of the screen is made in the form of a glass plate with a mirror-smooth surface that is scratch-resistant. Judging by the reflection of objects, the anti-glare properties of the screen are no worse than those of the Google Nexus 7 (2013) screen (hereinafter simply Nexus 7). For clarity, here is a photograph in which a white surface is reflected when the screens are turned off (on the left is Nexus 7, on the right is Alcatel Pop 4S, then they can be distinguished by size):
The Alcatel Pop 4S's screen is just as dark. The ghosting of reflected objects in the Alcatel Pop 4S screen is very weak, this indicates that there is no air gap between the layers of the screen (more specifically, between the outer glass and the surface of the LCD matrix) (OGS - One Glass Solution type screen). Due to the smaller number of boundaries (glass/air type) with very different refractive indices, such screens look better in conditions of intense external illumination, but their repair in the case of cracked external glass is much more expensive, since the entire screen has to be replaced. On the outer surface of the screen, there is a special oleophobic (grease-repellent) coating, which is slightly better in efficiency than that of the Nexus 7. Therefore, fingerprints are removed much easier and appear at a lower speed than in the case of regular glass.
When manually controlling the brightness and displaying the white field in full screen, the maximum brightness value was about 400 cd/m², the minimum was 15 cd/m². The maximum brightness is low, but given the good anti-glare properties, something on the screen will be visible even on a sunny day outdoors, but only if the image is on average bright - see below. In complete darkness, the brightness can be reduced to a comfortable value. There is automatic brightness adjustment based on the light sensor (it is located to the right of the front speaker slot). In automatic mode, as external lighting conditions change, the screen brightness both increases and decreases. The operation of this function depends on the brightness adjustment position. In complete darkness, if the slider is at 100%, then the auto-brightness function reduces the brightness to 70 cd/m² (too much), if the adjustment is about 50%, then - 15 cd/m² (normal), and if at 0%, then - 3 cd/m² (a bit dark). Whereas in an artificially lit office (about 550 lux) and in a very bright environment (corresponding to the lighting of a clear day outdoors, but without direct sunlight - 20,000 lux or a little more), the brightness increases to 400 cd/m², regardless of the brightness slider setting . It turns out that the auto-brightness function does not work adequately. At any brightness level, there is no significant backlight modulation, so there is no screen flicker.
This smartphone uses an IPS matrix. The microphotographs show a typical IPS subpixel structure:
For comparison, you can see the gallery of microphotographs of screens used in mobile technology.
However, the subpixels themselves are arranged in an unconventional way - in the horizontal direction (in landscape orientation) there are typical columns, but in each column the subpixel triads are shifted by one subpixel vertically, first up and then down.
Note that we have already seen a similar arrangement of subpixels in the case of HTC 10 and a number of other smartphones. As a result, the ratio of horizontal columns to vertical triads is 3 to 2, that is, the actual vertical resolution is 1/3 less than horizontal (hereinafter we mean landscape screen orientation). That is, there are actually only 1920 by 720 dots (RGB triads) on the screen, and not 1920 by 1080. The resolution is high in any case, and these matrix features practically do not appear in any way when viewing text, photographs and videos, but test worlds are displayed with visible artifacts.
The screen has good viewing angles without a significant color shift even with large deviations of the view from perpendicular to the screen and without inverting (except for the very darkest when deviating along one diagonal) shades. For comparison, here are photographs in which identical images are displayed on the screens of Alcatel Pop 4S and Nexus 7, while the screen brightness is initially set to approximately 200 cd/m² over a white field in the entire screen, and the color balance on the camera is forcibly switched to 6500 K. Perpendicular white field to the screens:
We note some unevenness in the brightness and color tone of the white field, which exceeds the average level.
And a test picture:
The Alcatel Pop 4S's screen is dark, and the color balance between the two screens is clearly not the same.
Now at an angle of approximately 45 degrees to the plane and to the side of the screen:
It can be seen that the colors did not change much on both screens, but on the Alcatel Pop 4S the contrast decreased to a greater extent due to the strong brightening of blacks, and it also began to show signs of inverting dark shades.
And a white field:
The brightness of the screens at an angle has decreased (by at least 5 times, based on the difference in shutter speed), but the Alcatel Pop 4S screen is still a little brighter. When deviated diagonally, the black field is brightened greatly, but remains approximately neutral gray. The photographs below demonstrate this (the brightness of the white areas in the direction perpendicular to the plane of the screens is the same, for which I had to move the brightness adjustment slider to maximum, and still it turned out to be only 190 cd/m² in the white area!):
And from another angle:
When viewed perpendicularly, the uniformity of the black field is good:
The contrast (approximately in the center of the screen) is high - about 1500:1. The black-white-black response time is 27 ms (13.5 ms on + 13.5 ms off). The transition between halftones of gray 25% and 75% (based on the numerical value of the color) and back takes a total of 38 ms. The gamma curve, constructed using 32 points with equal intervals based on the numerical value of the shade of gray, did not reveal any blockage in either the highlights or the shadows. The exponent of the approximating power function is 4.19, but in this case it does not matter, since the real gamma curve is not at all similar to the power dependence:
This device has a very aggressive dynamic adjustment of the backlight brightness depending on the nature of the displayed image and the time at which this image is displayed. As a result, the resulting dependence of brightness on hue (gamma curve) does not correspond to the gamma curve of a static image, since the measurements were carried out with sequential display of shades of gray on almost the entire screen. For this reason, we carried out a number of tests - determining contrast and response time, comparing black illumination at angles - (however, as always) when displaying special templates with a constant average brightness, and not monochromatic fields in the entire screen. In general, such a non-switchable brightness correction does nothing but harm, since constantly changing the screen brightness can at least cause some discomfort, greatly reduce the visibility of gradations in shadows in the case of dark images and the readability of the screen in bright light, since in average images that are not the lightest The brightness of the backlight is greatly reduced, but there is not too much of it anyway.
The color gamut is slightly different from sRGB:
The spectra show that the matrix filters moderately mix the components with each other:
However, the deviations of the coordinates of the primary colors from the vertices of the sRGB triangle are small, so visually the colors on this screen practically do not differ from natural ones. The balance of shades on the gray scale is average, since the color temperature is higher than the standard 6500 K and the deviation from the blackbody spectrum (ΔE) is more than 10, which is not considered a very good indicator even for a consumer device. However, color temperature and ΔE change little from hue to hue - this has a positive effect on the visual assessment of color balance. (The darkest areas of the gray scale can be ignored, since color balance there is not very important, and the error in measuring color characteristics at low brightness is large.)
This device has a fairly advanced system of profiles and settings, which provides the ability to adjust color balance, etc. It’s called MiraVision.
The curves in the graphs above Without corr. correspond to the results without any color balance correction, and the curves Warm- data obtained after shifting the color temperature correction slider to the extreme “warm” position, as in the picture below.
It can be seen that the change in balance corresponds to the expected result, since the color temperature approached the standard value, although ΔE also increased significantly. It doesn't make much sense to make a correction.
To summarize: the screen has a low maximum brightness, but has good anti-glare properties, so the device can somehow be used outdoors even on a sunny summer day, but you should expect a strong decrease in legibility when displaying images that are dim on average. In complete darkness, the brightness can be reduced to a comfortable level. The mode with automatic brightness adjustment does not work adequately, it is better not to use it. The advantages of the screen include an effective oleophobic coating, the absence of air gaps in the layers of the screen and flickering, as well as high contrast and good uniformity of the black field. The disadvantages are low black stability to deviation of the gaze from perpendicular to the screen plane, poor color balance, as well as non-disabled dynamic adjustment of the backlight brightness. Even taking into account the importance of characteristics for this particular class of devices, the quality of the screen cannot be considered high.
Sound
Alcatel Pop 4S cannot offer anything special in terms of sound. There is a proprietary Mix player with emulation of a DJ console: you can synchronize tracks, do mixing, and add audio effects. But it feels more like instant entertainment than a serious application for creating real music, and the sound of the smartphone's speakers is rather modest. The sound is without a noticeable presence of low frequencies, rather monotonous, not bright and not too loud. The situation does not improve noticeably with headphones; the sound is just as faded and monotonous, with a predominance of high frequencies and not entirely clear.
There are no special complaints about the conversational speaker and microphone: the sound of the voice of a familiar interlocutor is a little muffled, but quite intelligible. Interlocutors on the other side also do not note any noticeable problems with sound during telephone conversations. The microphone sensitivity is enough for voice recordings, but the noise reduction system cannot cope with its responsibilities. During playback of the resulting recordings, background noise is clearly audible, this spoils the whole picture. FM radio is included as standard with the smartphone.
 |
 |
 |
 |
Camera
Alcatel Pop 4S is equipped with two digital camera modules with a resolution of 13 and 5 megapixels. The front module has a 5-megapixel sensor and f/2.4 aperture optics with a fixed focus and its own front-facing flash. The shooting quality turned out to be quite mediocre even by the standards of a selfie camera. There are serious complaints about sharpness, detail, and especially color rendition and automatic white balance.
The main camera has a 13-megapixel sensor and an f/2.0 aperture lens. Autofocus is quite fast, the dual flash is bright, and there is an electronic stabilization function for photo and video shooting.
Alcatel did not add its own menu for controlling the camera; the menu here is standard for systems on the MediaTek platform, it is simple in appearance, but it has everything you need. You can manually adjust and set exposure, ISO (up to 1600), white balance, brightness, contrast, you can select additional modes like night, sports or even PIP and QR code. You cannot transfer control of camera settings to third-party applications using the Camera2 API, and there is also no possibility of recording in RAW.
 |
 |
 |
 |
 |
 |
The camera can shoot video in a maximum resolution of 1080p; there are no 4K or 60 fps modes. Electronic stabilization is present and really makes shooting on the go smoother. But that’s where the positives end: the camera’s overall handling of video shooting is average, detail is quite low, the picture is faded, blurry, not rich, and the colors are not natural. Sensitive microphones record sound well, but the noise reduction system does not cut out noise well, and the sound remains littered and noisy.
- Video No. 1 (52 MB, 1920×1080@30 fps, H.264, AAC)
 |
The text is not very well done, but it is readable. |
 |
The camera copes with macro photography. |
 |
The foliage begins to merge in the foreground. |
 |
A small area of sharpness in the foreground below. |
 |
From time to time, the camera somehow works on long-range plans. |
 |
The entire right half of the frame is out of focus. |
 |
The entire frame is out of focus. |
| Alcatel Pop 4S | Apple iPhone 6s Plus |
 |
 |
 |
 |
 |
 |
 |
 |
From the first frames it is clear that the camera can only be used to shoot text. She had no luck with the program, and even more luck with the optics. Perhaps this is due to the skew of the lens, which may explain the sharp zones that periodically appear in the photographs. But most of the time, the camera can barely focus. So the verdict is quite obvious: just shooting the text, and then double-checking the results.
Telephone and communications
The smartphone works as standard in modern 2G GSM and 3G WCDMA networks, and also has support for LTE FDD Cat.4 networks, that is, the maximum download speed is limited to 150 Mbit/s. The device has no problems with Russian frequencies; it can operate in all three 4G bands supported by domestic operators (LTE Cat.4 FDD Band 3, 7, 8, 20).
In practice, in the Moscow region, the smartphone registered and worked in 4G networks without problems, and the connection speed via LTE was generally fine. The quality of signal reception does not cause any particular complaints; the device supports communication indoors and does not lose the signal in areas of poor reception.
The rest of the network capabilities are also without any complaints: the smartphone operates in both Wi-Fi bands (2.4 and 5 GHz), has Wi-Fi Direct, you can organize a wireless access point via Wi-Fi or Bluetooth 4.1 channels, and even has NFC support . The Micro-USB 2.0 connector supports connecting external devices in USB OTG mode.
 |
 |
The navigation module works with both GPS (with A-GPS) and the domestic Glonass. There are no complaints about the operation of the navigation module; the first satellites during a cold start are detected within the first tens of seconds with minimal error. The smartphone is equipped with a magnetic field sensor, on the basis of which the digital compass of navigation programs usually operates.
 |
 |
The phone application supports Smart Dial, that is, while dialing a phone number, a search is immediately carried out by the first letters in contacts/. The standard keyboard is quite modest (for example, it does not have support for stroke input), but the device already has an alternative SwiftKey keyboard pre-installed as an additional one, you can use it, it has wider possibilities.
 |
 |
The smartphone supports dual SIM cards. The standard interface allows you to select a specific card for each function in advance or directly during the connection. Work with two SIM cards is organized according to the usual Dual SIM Dual Standby standard, when both cards can be in active standby mode, but cannot work at the same time - there is only one radio module.
 |
 |
OS and software
The Alcatel Pop 4S uses the Google Android 6.0 software platform as a system. There is no full-fledged alternative interface here, but there is a custom launcher that modifies the application menu, adds limited support for gestures and several widgets.
As for additional programs, there are a lot of them. This mainly applies to pre-installed games, and there are also some that would otherwise be purchased for money. For example, through its own application center you can play Minecraft completely free of charge. Any applications can be installed on a microSD memory card. Otherwise, the interface remains familiar, because in general there are practically no differences from the original Android OS version 6.
 |
 |
 |
 |
 |
 |
 |
 |
Performance
The Alcatel Pop 4S hardware platform is based on the MediaTek MT6755M SoC, also known as Helio P10. The Helio P10 configuration includes a 64-bit octa-core True8Core processor based on the ARM Cortex-A53 architecture, clocked at 2 GHz, and an ARM Mali-T860 graphics processor, clocked at 700 MHz. True, in this version of the MT6755M the maximum frequency of four processor cores is reduced to 1.8 GHz, and the other four to 1.0 GHz, while the graphics processor operates at a frequency of 550 MHz.
The RAM capacity of the younger modification of the smartphone is 2 GB, the built-in flash memory is 16 GB, of which about 10.3 GB are initially available to the user for his needs. This volume can be increased using microSD cards. It is also possible to connect external flash drives to the USB port in OTG mode. MicroSD cards are supported up to 128GB in capacity, and in practice our review Transcend Premium microSDXC UHS-1 128GB card was successfully recognized by the device. Installing applications onto a memory card is supported; to do this, it must be formatted and all previous data will be lost. You can use the card in normal storage mode, but then you won't be able to install applications on it.
 |
 |
 |
 |
Judging by the comparison table with test data from other current mobile platforms, it is possible to repeat what was already known from previous tests. SoC MediaTek MT6755 (Helio P10) is far from top-end, but confidently average. It does not give high numbers in benchmarks, but it copes well with any tasks, including demanding games. Although, of course, games do not run at maximum settings and fps values: even in World of Tanks, the figures average 40-45 fps with a maximum possible 60 fps and higher. In more demanding games, short stutters sometimes occur, but overall this does not affect comfort. Such a platform does not have a noticeable performance reserve for the future.
Testing in the latest versions of comprehensive tests AnTuTu and GeekBench:
For convenience, we have compiled all the results we obtained when testing the smartphone in the latest versions of popular benchmarks into tables. The table usually adds several other devices from different segments, also tested on similar latest versions of benchmarks (this is done only for a visual assessment of the obtained dry figures). Unfortunately, within the framework of one comparison it is impossible to present the results from different versions of benchmarks, so many worthy and relevant models remain “behind the scenes” - due to the fact that they once passed the “obstacle course” on previous versions of test programs.
 |
 |
Testing the graphics subsystem in gaming tests 3DMark, GFXBenchmark, and Bonsai Benchmark:
When testing in 3DMark, the most powerful smartphones now have the ability to run the application in Unlimited mode, where the rendering resolution is fixed at 720p and VSync is disabled (which can cause the speed to rise above 60 fps).
| Alcatel Pop 4S (MediaTek Helio P10) |
Huawei Nova Plus (Qualcomm Snapdragon 625) |
Micromax Canvas Q465 (Spreadtrum SC9832) |
Leagoo M5 (MediaTek MT6580) |
Doogee T6 Pro (MediaTek MT6753) |
|
| 3DMark Ice Storm Sling Shot (more is better) |
414 | 463 | — | — | 198 |
| GFXBenchmark Manhattan ES 3.1 (Onscreen) | 5 fps | 7 | — | — | 7 |
| GFXBenchmark Manhattan ES 3.1 (1080p Offscreen) | 5 fps | 6 | — | — | 3 |
| GFXBenchmark T-Rex (Onscreen) | 17 fps | 23 | 7 | 8 | 19 |
| GFXBenchmark T-Rex (1080p Offscreen) | 17 fps | 23 | 4 | 4 | 12 |
 |
 |
Browser cross-platform tests:
As for benchmarks for assessing the speed of the javascript engine, you should always make allowance for the fact that their results significantly depend on the browser in which they are launched, so the comparison can only be truly correct on the same OS and browsers, and this is possible during testing not always. For Android OS, we always try to use Google Chrome.
Thermal photographs
Below is a thermal image rear surface obtained after 10 minutes of battery testing in the GFXBenchmark program:
It can be seen that the heating is highly localized on the right side of the device, which apparently corresponds to the location of the SoC chip. According to the heat chamber, the maximum heating was 42 degrees (at an ambient temperature of 24 degrees). Such heating cannot be called insignificant.
Playing video
To test the omnivorous nature of video playback (including support for various codecs, containers and special features, such as subtitles), we used the most common formats, which make up the bulk of the content available on the Internet. Note that for mobile devices it is important to have support for hardware video decoding at the chip level, since it is most often impossible to process modern options using processor cores alone. Also, you shouldn’t expect a mobile device to decode everything, since the leadership in flexibility belongs to the PC, and no one is going to challenge it. All results are summarized in a table.
According to the testing results, the test subject was not equipped with all the necessary decoders that are needed to fully play most of the most common multimedia files on the network, in this case, audio files. To successfully play them, you will have to resort to the help of a third-party player - for example, MX Player. True, it is also necessary to change the settings and manually install additional custom codecs, because now this player does not officially support the AC3 sound format.
| Format | Container, video, sound | MX Video Player | Standard video player |
| BDRip 720p | MKV, H.264 1280×720, 24fps, AAC | plays normally | plays normally |
| BDRip 720p | MKV, H.264 1280×720, 24fps, AC3 | The video plays fine, there is no sound | |
| BDRip 1080p | MKV, H.264 1920×1080, 24fps, AAC | plays normally | plays normally |
| BDRip 1080p | MKV, H.264 1920×1080, 24fps, AC3 | The video plays fine, there is no sound | The video plays fine, there is no sound |
Further testing of video playback was performed Alexey Kudryavtsev.
We did not find the MHL interface, like Mobility DisplayPort, in this smartphone, so we had to limit ourselves to testing the output of video files on the screen of the device itself. To do this, we used a set of test files with an arrow and a rectangle moving one division per frame (see “Methodology for testing video playback and display devices. Version 1 (for mobile devices) 720/24p
Note: If in both columns Uniformity And Passes Green ratings are given, this means that, most likely, when watching films, artifacts caused by uneven alternation and frame skipping will either not be visible at all, or their number and visibility will not affect the viewing comfort. Red marks indicate possible problems with playback of the corresponding files.
According to the frame output criterion, the quality of playback of video files on the screen of the smartphone itself is good, since frames (or groups of frames) can (but are not required) be output with more or less uniform alternation of intervals and without skipping frames - with the exception of files with 60 fps, in in which case about 3-4 frames per second are missed, and often in pairs in a row. The reason is the atypically low screen refresh rate of 56-57 Hz. When playing video files with a resolution of 1920 by 1080 pixels (1080p) on a smartphone screen, the image of the video file itself is displayed exactly along the border of the screen, one to one in pixels, that is, conditionally in the original resolution. (Conventionally, since this screen does not have a physical resolution of 1920 by 1080 pixels - see above. In particular, artifacts appear on the test worlds: instead of horizontal (in landscape screen orientation) stripes, some kind of color pattern is displayed through the pixel.) Displayed on The brightness range on the screen corresponds to the standard range of 16-235: in the shadows, only a couple of shades merge with black, and in the highlights all gradations of shades are displayed.
Battery life
The non-removable battery installed in the Alcatel Pop 4S has a capacity of 2960 mAh. The battery seems to be quite good, but smartphones on power-hungry MediaTek platforms have never been known for their longevity, and the hero of the review, unfortunately, was no exception. Here, in terms of autonomy, everything is at an average level: not a failure, but Alcatel Pop 4S is very, very far from the level of leaders in this regard. With such a battery, autonomy could be higher. The smartphone lasts until evening charging, but you shouldn’t hope for longer use.
Testing has traditionally been carried out at the usual level of power consumption, while the smartphone also has a standard power saving mode.
Continuous reading in the Moon+ Reader program (with a standard, light theme) at a minimum comfortable brightness level (brightness was set to 100 cd/m²) with auto-scrolling lasted until the battery was completely discharged for about 11 hours, while continuously watching videos in high quality (720p) with At the same brightness level via a home Wi-Fi network, the smartphone operates for no longer than 8.5 hours. In 3D gaming mode, the smartphone lasted only 3.5 hours.
The smartphone is charged from a standard charger within 2.5 hours with a current of 1 A at a voltage of 5 V. The device does not support wireless charging.
Bottom line
As for the price, at the moment Alcatel Pop 4S can be ordered in Alcatel’s own online store at a price of 16 thousand rubles, and the device is certainly not worth that kind of money. This is a completely ordinary, unprepossessing in appearance and lacking stars from heaven, an overpriced middling product that has a huge number of competitors in an extremely oversaturated segment. The smartphone could have surprised little even at a lower price: the screen here is of low quality, and this is one of the main characteristics of a modern smartphone. Many competitors can offer better sound, shooting quality, battery life and even appearance for less money. The obvious advantages of Alcatel Pop 4S include support for all Russian LTE frequencies, the presence of a fingerprint sensor and NFC support. Realizing this, many sellers are reducing the price of this device: now you can find retail offers for 12-13 thousand rubles, although even at this price Alcatel Pop 4S sales are unlikely to be significant.
Alcatel is one of the famous brands that produces smartphones. Today we present to you an overview of the technical characteristics of the Alcatel One Touch POP STAR 5022D smartphone and a video review. In addition, you can get all the technical data about this smartphone model and find out the average price in stores if the model is still on sale and is not outdated.
Specifications Alcatel One Touch POP STAR 5022D
| Control | |
| OS version | |
| Type | smartphone |
| Dimensions (WxHxD) | |
| SIM card type | |
| Type of shell | |
| Number of SIM cards | |
| SAR level | |
| Weight | 145 g |
| Image Size | |
| Screen type | |
| Touch screen type | |
| Automatic screen rotation | |
| Diagonal | |
| Pixels per inch (PPI) | |
| Light indication of events | |
| Rear camera | |
| Front-camera | |
| Audio | MP3 |
| Headphone jack | |
| Rear camera aperture | |
| Photoflash | |
| Recording videos | |
| Max. video resolution | |
| Interfaces | Wi-Fi 802.11n, Wi-Fi Direct, Bluetooth 4.0, USB |
| Standard | GSM 900/1800/1900, 3G |
| A-GPS system | There is |
| LTE bands support | |
| Satellite navigation | GPS |
| RAM capacity | |
| Number of processor cores | 4 |
| Video processor | Mali-400 MP2 |
| Built-in memory capacity | |
| CPU | MediaTek MT6580, 1300 MHz |
| Memory card slot | Yes, up to 32 GB |
| Battery type | |
| Charging connector type | |
| Battery capacity | 2000 mAh |
| Flashlight | |
| Sensors | illumination, proximity |
| Airplane mode | There is |
| Equipment | smartphone, AC charger with USB cable, headphones, 2 replaceable back covers: yellow and green |
| Announcement date | |
| Multi-SIM mode | |
| Rear camera functions | |
| Max. video frame rate | |
| Amount of memory available to the user | |
| Talk time | |
| Standby time | |
| USB-host | |
| Housing material | |
| operating system | |
| A2DP profile | There is |
| Battery | |
| Peculiarities | |
| Fast charging function | |
| Operating time while listening to music | |
| Vibration alert | |
| Ringtones type | |
| Camera | 8 million pixels, LED flash |
| Access to the Internet | |
| MMS | |
| Speakerphone (built-in speaker) | |
| Organizer | |
| Camera functions | |
| Dictaphone | |
| Diaphragm | |
| Games | |
| Memory card slot | |
| Dimensions (HxWxT) | |
| Replaceable panels | |
| Joystick | |
| Automatic screen rotation (accelerometer) | |
| Screen diagonal | |
| Permission | |
| Color screen | |
| Touch screen | |
| Number of screen colors | |
| Infrared port (IRDA) | |
| USB | |
| Synchronization with computer | |
| Bluetooth | |
| GPRS | |
| HTML | |
| Modem | |
| WAP browser | |
| MP3 player | |
| FM radio | |
| Stereo speakers | |
| MP3 ringtones | |
| Dictionary input | |
| Built-in phone book capacity | |
| Organizer/calendar | |
| Calculator | |
| Alarm | |
| MS Office support | |
| Java applications | |
| Waiting time | 566 h |
| Talk time | 12 h |
| Platform | |
| CPU frequency | |
| Memory card type | |
| Max. memory card capacity | |
| Fingerprint scanner | |
| Water protection | |
| Shockproof housing | |
| Navigation key | |
| QWERTY keyboard | |
| Pixels per inch | |
| Light sensor | |
| Proximity sensor | |
| Gyroscope | |
| Built-in flash | |
| Autofocus | |
| Flash type | |
| Number of megapixels | |
| USB-host/OTG | |
| WiFi | |
| A2DP | |
| Wi-Fi Direct | |
| DLNA | |
| Bluetooth standard | |
| Headphone output | |
| NFC | |
| EDGE | |
| HSPA+ | |
| DC-HSDPA | |
| HSDPA | |
| POP/SMTP client | |
| GPS module | |
| Compass | |
| GLONASS | |
| A-GPS | |
| A.A.C. | |
| Built-in radio antenna | |
| WMA | |
| Voice dialing | |
| Conference call | |
| Speakerphone | |
| Sound timer | |
| Wireless charging function | |
| Digital Zoom | |
| Video resolution | |
| Geo-tagging | |
| HSUPA | |
| HSCSD | |
| Push-To-Talk | |
| Voice control | |
| Smile detection | |
| Face recognition | |
| IMAP4 | |
| WAV | |
| Number of melodies | |
| Auto redial | |
| Macro mode | |
| Message templates | |
| Video Frame Rate | |
| EMS | |
| USB charging | |
| PictBridge support | |
| Dual Bluetooth Headset | |
| Scratch-resistant glass | |
| Barometer | |
| Optical stabilization | |
| MHL support | |
| Audio coding modes HR, FR, EFR | |
| Battery mount | |
| Use as a USB storage device | |
| Case type | classical |
| Control type | voice dialing, voice control |
| SIM card type | micro SIM |
| Supported number of SIM cards | 2 |
| Dimensions | 71.5x141x8.6 mm |
| Screen display type | color IPS, 16.78 million colors, touch |
| Image format | 1280×720 |
| Additional screen | |
| Vibration alert | |
| Ringtones editor | |
| Games and entertainment | |
| Internet access | |
| Supported protocols | |
| Built-in modem | |
| Connecting to a computer | |
| Built-in memory | 8 GB |
| Additional SMS features | |
| Sound indication of talk time | |
| Audio coding modes | |
| Notebook | |
| Search by book | |
| Direct dial | |
| Announcement date | |
| Video recording support | There is |
| Auto redial function | |
| Design | |
| Camera | autofocus |
| Discontinued | |
| Screen size | 5 inch |
| Pixels per inch | |
| Headphone input | 3.5 mm |
| Exchange between SIM card and internal memory | |
| Sales start date | |
| Record conversations voice recorder | |
| Time to fully charge | |
| Body material | |
| Touch screen type | multi-touch, capacitive |
| Rotate the screen | There is |
| Video resolution | 1920×1080 |
| Video frame rate | |
| USB charging | |
| Watch video | |
| Built-in flashlight | |
| Use as a flash drive | |
| Music listening time | |
| OS | Android 5.1 |
| Recognition | |
| Front camera | yes, 5 million pixels. |
| RAM | 1 GB |
| Working with multiple SIM cards | alternating |
| Available Memory | 4.50 GB |
| Multitouch | |
| Number of megapixels of the front camera | |
| Exchange between phone books | |
| Protective glass | |
| DLNA support | |
| Geo Tagging | |
| LTE support | |
| TV connection | |
| Light notifications | |
| Charging input | |
| Color: | |
| Year of market entry | |
| Two screens | |
| SOS button | |
| Additional battery | |
| Sending to multiple subscribers | |
| Purpose | |
| Rear camera aperture | |
| Video output |
Video review of Alcatel One Touch POP STAR 5022D
Alcatel One Touch POP STAR 5022D price is subject to availability. If the model is outdated and not for sale, then there is no price.
Average price for Alcatel One Touch POP STAR 5022D in stores: 6490
