To bookmarks

Notebooks. Repairs. Games. Internet. Social media

Join Vkontakte
home Phones and communications Setting up beeline television through a router. We connect and configure the beeline router. Further wi-fi settings

Setting up beeline television through a router. We connect and configure the beeline router. Further wi-fi settings

The Beeline company has long managed to establish itself as the best provider of home Internet. This article will discuss the step-by-step setup of the Beeline Wi-Fi router, which will allow you to set up your home Wi-Fi on your own, without resorting to the help of a third-party specialist.

You need to be puzzled by connecting the router after the company’s masters have installed a cable into your apartment, thanks to which you can access high-speed Internet. It remains to correctly configure the link that will connect your computer and cable, allowing you to freely roam the expanses of the World Wide Web.

Plug the cable into the WAN port of your router. Also, for the initial setup, you will need the cable that comes with the router to connect the computer and the modem. Connect the modem itself to the network using the included power supply.


Open any internet browser. It does not matter if it is a standard browser (Internet Explorer) or any third-party (Opera, Mozilla Firefox, Chrome, etc.).

Write the following address without quotes in the address bar and press the Enter key: "192.168.10.1".

A window will open in which the system will ask you to enter your username and password. Enter the word "admin" in both fields and click OK.

Next, the web interface of the Beeline router itself will open, where you need to change some parameters. First you need to change the connection settings. To do this, go to the "Basic Settings" section and click on the "WAN" item.

Enter the following parameters:

- Connection type - L2TP

- IP address / Server name - tp.internet.beeline.ru

- Username - enter the desired login

- Password - set a password using numeric and alphabetic values

- Address type - dynamic

- MTU - 1460

Check the box next to "Obtain DNS automatically" and apply the settings by clicking the "Save changes" button.

The router will make new settings for a while. As a rule, this will take no more than 1-2 minutes, after which the following message will be displayed on your monitor: "Changing the settings was successful." Click the OK button to close the window.

Select the Wi-Fi Settings tab. All the basic settings of your router are reflected here.

Check the following options:

- Turn off the wireless network - if you plan to use the Internet via a Wi-Fi network, then there SHOULD NOT be a checkmark next to this item.

- Standard - 2.4GHz (B + G).

- Mode - AP.

— Wireless network name - select the desired name.

- Channel number - Auto.

After making the new settings, click the "Save Changes" button.

After a few seconds, the router will save your changes. Your router is almost ready to use.

Let's move on to securing your wireless network, which will allow you to protect yourself from intruders, and for this it must be encrypted.

Without leaving the "Wi-Fi Settings" section, open the "Security" item.

A new page will open where you need to make the following settings:

- Authentication - WPA2 mixed.

- WPA encryption - TKIP.

- WPA2 encryption - AES.

— The preset key format is a password.

"Preset Key" - enter the desired password, which will contain at least eight characters. As symbols, it is allowed to use letters of the Latin alphabet of small and large case, numbers and special characters (! №;%: etc.).

To complete the router settings, click "Save Changes".

Now you can freely surf the World Wide Web, forgetting about wires.

The mobile operator Beeline at one time acquired the business of one of the major players in the Internet provider market, therefore today its subscribers in the field of providing high-speed connection are millions of users. Therefore, I decided to write this step-by-step article on setting up a Beeline router, which describes connecting to the Internet using the L2TP protocol and can be used for any model, regardless of manufacturer - Asus, D-Link DIR, TP-Link, Zyxel Keenetic and so on. Differences can only be in the layout of settings functions and menu headings in the device admin panel.

Connecting a Beeline router to a computer

There will be one or more network connection icons, of which we need "Local Area Connection". We call the menu of its settings by clicking the right mouse button and go to "Properties"

There is such a section as “Internet Protocol version 4” - check the boxes to receive the IP and DNS server “on the machine”.


Save changes with the button.

Setting up a router on the Internet from Beeline


We return to the computer, and in the address bar of the browser we type the IP address from the label.


We find in the menu of the router the section responsible for connecting to the Beeline Internet - it can be called the Internet or WAN

  • In the WAN connection type column, select "L2TP"
  • WAN IP address - automatically
  • DNS - automatically


In the "Server" section, write "tp.internet.beeline.ru"
Username and password - we specify from the contract with Beeline.

Save the settings and reboot the router.

Setting up a Beeline router to broadcast a wireless signal

Finally, it remains to configure WiFi. Open the "Wireless Network" section in the menu and set your own values ​​for:

  • - the name of your wifi network, which will be displayed in the list for connection
  • Network security method - WPA2-Personal
  • - AES or TKIP
  • - password for connecting to WiFi, at least 8 characters

Many providers provide access to the network, but Beeline is considered one of the popular options. The company provides mobile 4G internet or home connection. You can set up a connection through a branded modem or router from another company to get Wi-Fi coverage. Configuration may vary due to device model.

Setting up a router for Beeline

When using several computers at home, the task of setting up Wi-Fi becomes urgent. Wireless Internet is especially convenient with modern smartphones, tablets or laptops. Setting up Beeline through a router can be done automatically or manually, it depends on the device model. As a rule, when concluding an agreement, a wizard comes home to help create a connection. If the installation of Wi-Fi was carried out later, or the device was replaced, then you will have to set up the connection again.

For each device, there is an instruction for setting the parameters for proper operation, but there are points that are the same for each case. Eg:

  • connect the wire (cable) to the router;
  • connect the device through the second wire to the computer;
  • configure the device (drive in the address of the Beeline router, set the type of connection, set a password and protect the connection).

There are several popular models of devices that are used by most customers. Few people take options without Wi-Fi, because, as a rule, the device is purchased for it. Setting up a Beeline dir router takes place in two stages: physical connection, connection management through a browser. First, make sure the network card has the latest firmware. This is more true for owners of older computer models. The configuration is then carried out as follows:

  1. Unpack the device, connect the power supply, the cord into the connector labeled "WAN". Connect the second cord to one of the additional inputs and bring it to the computer.
  2. Next, set up the connection in the Start menu. Go to the "Control Panel" item here click on "Network Control Center ...". Click "Adapter Options". Set the line to Internet protocol version 4, then click "Properties".
  3. Make sure that the items with automatic issuance of IP and DNS servers are active.
  4. Next, you need to go to the internal interface. To do this, in any browser, type "192.168.1.1" into the site address field. A login/password form will be displayed to enter the admin panel. To go inside, you need to enter the word "Admin" in both fields. These are factory access options, if they do not fit, then they have been changed. You can reset the values ​​by holding down the Reset button on the device. Hold for about 10 seconds.
  5. When you enter the backend, select "Manually Configure". Next, go to the "Network" tab, click "Add".
  6. Select connection type - L2TP, dynamic IP.
  7. In the appropriate fields, enter, issued by Beeline, login, password.
  8. Check the boxes next to "Keep Alive" and "Connect automatically". Click Save.
  9. Click "Save" again. Next, the connection will be automatic. To find out about the correct operation of the network, just go to any site from your phone.

Setting up an Asus Beeline router

Another popular device manufacturer is Asus. There is no program on the disk for automatically connecting to the network, so you have to do everything manually. You need to configure the Asus Beeline router as follows:

  1. Connect the device to power, network and computer.
  2. Open the browser, write in the address bar of the site 192.168.1.1, press enter.
  3. For access, enter the password and login "admin".
  4. In the back end, click on the "Advanced Settings" tab, select "Wan". Next, specify the following data: "Connection Type" - "L2TP", "Get the WAN IP automatically" - "Yes", "Connect to DNS Server automatically" - "Yes", "VPN Server" - "tp.internet.beeline. ru". In the login / password fields, specify the accesses issued by the provider.
  5. To turn on Wi-Fi, go to the “Network Map” item.
  6. A table for quick wireless configuration will appear on the right. You need to configure it as follows: "Wireless name" - specify / come up with a name for your home network, "Security level" - "WPA-Auto-Personal", "WPA Encryption" - "TKIP + AES". On the line "WPA-PSK key" write the password for Wi-Fi. Click the "Apply" button.

Setting up a TP-Link router for Beeline

This is a popular model due to the presence of an installation wizard that is able to connect to the network on its own. As a rule, a disk is sold with the device, on which the program is located. You just need to connect the router to your computer, insert the CD and run the application. If the connection does not open, you need to do everything yourself. Setting up a TP-Link router for Beeline is carried out as follows:

  1. After connecting the device, go to the browser, type "192.168.1.1", press "Enter". Enter login/password "admin"
  2. Open the "Network" tab and the "WAN" item.
  3. Specify the type of connection "L2TP", enter the login / password that your provider (Beeline) issued, the IP server - "tp.internet.beeline.ru".
  4. Specify the automatic connection ("Connect Automatically"), the MTU size is 1400. Click on the "Save" button.
  5. To turn on the Wi-Fi network, you need to go to the "Wireless" section, click on the "Wireless Settings" item.
  6. Come up with a name for the network, specify the region "Russia", the channel and the mode - "automatically". Click the "Save" button.
  7. Next, go back to the "Wireless" section, click on "Wireless Security".
  8. Here, activate the item "WPA-PSK / WPA2-PSK", then everything is on the "automatic" mode. Create a password for the connection, click "Save".

Setting up a Zyxel Keenetic router for Beeline

Some users prefer Zyxel. The physical connection of the router is carried out in the same way (wire to the WAN connector and the second to the computer's network card). The internal network setting of the Keenetic Beeline router is as follows:

  1. Type in the browser line 192.168.1.1.
  2. Enter "admin" as username/password.
  3. Go to the "Internet" section, click on "Connection".
  4. Specify the following values ​​in order: think of any name for the router, set the IP settings and get DNS automatically, check the box to answer ping requests and enable UPnP. Click on "Apply".
  5. Next you need the "Authorization" tab. Do not check the first item, the protocol must be L2TP, the server address is tp.internet.beeline.ru, write down the granted accesses in the login and password lines. Save your changes.
  6. To activate Wi-Fi, open the "Wi-Fi network" section, the "Connection" section.
  7. Check the box to enable the hotspot. Come up with a network name, the SSID field must remain empty, the standard is 802.11g / n. The next two items should be in the "auto-select" mode, then leave everything as it is. Click on "Apply".
  8. Go to the "Security" tab. Set authentication to WPA-PSK/WPA2-PSK, security type to TKIP/AES, format to ASCII. Think up, write the password for access. Click "Apply".

sovets.net

Connecting and configuring a router from Beeline

The most advanced Beeline WiFi router is SmartBox ONE, which is a multifunctional device and is used when connecting home Internet and digital television services. You will have to pay only 2500 rubles for the device. If there is no wired internet, you can use the ZTE MF90 4G router.

Benefits of using a router

The latest model of wireless equipment from the Beeline operator is equipped with a more powerful signal transmitter, which also now operates in two bands - 2.4 GHz and 5 GHz, which allows you not to worry that some device will not be able to connect to the Internet. An advanced processor ensures maximum reliability of the Wi-Fi signal throughout the entire area of ​​\u200b\u200bthe apartment or house.

The device has the following advantages:

  • 802.11n standard supported by most devices;
  • maximum transfer rate - 300 Mbps;
  • digital TV connection supported;
  • modern design that does not spoil the interior;
  • user-friendly interface for setting up the Internet.

4G router provides network access at speeds up to 74 Mbps. The kit comes with a SIM card that allows you to use 30 GB of Internet per month. The subscription fee is 1200 rubles. At night, there is an unlimited connection to the 4G network.

Read also how to connect a Beeline modem and what to do if the Internet does not work.

Connecting and configuring a 4G/WiFi router

Connecting the router is very simple - you just need to connect the power cable to the Power connector, and the Internet cable that goes into the apartment needs to be plugged into the WAN port. To connect the device to the network, you also need to connect the computer to the device by plugging the cable into any of the LAN connectors. The 4G router is connected to the computer via a USB connector.

The setting is carried out as follows:

  1. After all the lights on the device light up, you need to open any Internet browser on your computer and go to the address 192.168.1.1. The welcome page of the interface will open.
  2. To access Quick Setup, you must enter your username and password in the appropriate fields. The default setting is admin and the same password. After that, you need to click the "Continue" button.
  3. The main menu will open. Inexperienced users are advised to go through the quick setup procedure. If you know what to do, then you can go to the advanced settings menu.
  4. Quick setup consists of four items:
    • Home Internet. Here you can connect the equipment to the Beeline network. The firmware of the device already contains all the necessary network parameters, it remains only to enter the already familiar username and password.
    • WiFi network - this item allows you to set the parameters for accessing the wireless network. Here you need to enter the network name, which will be displayed in the connection menu on the devices used, as well as the password to enter the network. The password must be at least 8 characters long.
    • Guest network - here you enter the settings for guest access to the Internet.
    • TV - here you only need to select the LAN port to which the IPTV set-top box will be connected, if any.
  5. You need to click the "Save" button and let the router connect to the network. This should take no more than a minute.

When the router establishes a connection, the “Internet connected” message will appear in the “Status” line. This completes the setup, you can use the wireless network.

Setting up a 4G router is carried out in a similar way.

Software update

The operation of the device is ensured by its firmware, which should be updated in a timely manner in order to prevent malfunctions in the functioning of the router. The firmware must be updated carefully, and if something goes wrong, you will have to restore the device to a service center.

  1. The latest version of the software is downloaded from the official site.
  2. In the browser, you need to open the page 192.168.1.1.
  3. The menu is entered by entering the login and password (the default setting is admin in both fields).
  4. You should go to the advanced settings menu.
  5. Select "Other" at the top of the page.
  6. A list of settings will appear on the left, in which you need to select the “Software Update” item. At this point, you need to select the address on the computer where the downloaded firmware is located.
  7. Click the "Perform update" button and do not touch anything else, so as not to knock down the setup process.
  8. After a few minutes, the router will automatically reboot and be ready to go.

4G router firmware is not implemented.

Read also how to flash Bilay Smart-2 and how to flash a modem.

Home » Devices » Connecting and configuring a router from Beeline

beelinegid.ru

Before you connect the Beeline router, you need to configure the network card of your computer's operating system.

Consider this action using the example of setting up on the most popular operating systems.

We set the ip-address. To do this, go to "Start", then to the "Control Panel" section and select "Network Connections".

We right-click on the section of this menu "Local Area Connection" - in the drop-down menu, select "properties", click on "Internet Protocols TCP / IP" and select "properties" again.

Check the boxes for everything where the word "Automatic" occurs and save the changes.

Upon completion of these steps, you can start connecting the Beeline router.

Back to menu

Let's start with authorization. Open the browser, enter the request 192.168.0.1 in the address bar, now the data entry page will open. Enter - admin on both lines, this data is standard for everyone. You can change them later if you wish.

Now the settings page will become available to you, it is better to give preference to selecting the function manually. To enter the desired menu, click on the link "Advanced settings".

On the page that appears, select "WAN".

You must complete the following sections:

  • connection type - L2TP Dynamic IP;

  • user - the login that you created when you connected the Beeline Internet, it will definitely be in your contract;
  • password - the password that you created when you connected the Beeline Internet must also be in the contract;
  • VPN server address - write the following: tp.internet.beeline.ru.

Then you need to click the "Change" button.

Go to the "Advanced settings" section again, select WI-FI - after which, "Basic settings". In the "SSID" line, enter the name of your Wi-Fi network and click "Change".

Note! If you want to password-protect your network, returning to the last menu, click on "Security Settings". Opposite the "authentication" section, enter WPA-PSK2, "key" - your own password. (This is the most common secure connection and will help you protect your network from hackers and unauthorized Internet users).

Back to menu

To configure a tp-link router for Beeline, you should enter one of the addresses - 192.168.0.1 or tplinklogin.net in the address bar. An authorization field will appear, the login / password is standard - admin / admin. After authorization, you will be taken to the settings page.

Select the Network / Network section, and in it the WAN item.

On the page that opens, opposite the line “WAN (Connection Type), you need to select L2TP / Russia L2TP, in the fields “user name” and “password”, enter the data specified when connecting the Beeline Internet.

Then enter tp.internet.beeline.ru in Server IP Address/Name. be sure to check the box next to Connect automatically / Connect Automatically. Save your changes.

After that, a Wi-Fi network will be available for you to use.

Back to menu

The first connection of the router, you can use a cable or you can configure it via Wi-Fi wireless connection. Network address will be default - 192.168.1.1

Open Beeline Smart Box.

On this page, you need to click on the "Continue" button, this will help you get to the authorization section.

Login / password - admin / admin . After entering the data, the start page will open.

Before installing the Beeline Smart Box router, click on the clickable "Quick Setup" button, after which a window will appear where all the basic connection parameters will be.

In the field opposite the "Login" line, you must enter the number of the agreement concluded with the provider, "Password".

If you have lost the data required for authorization, contact the Beeline service center - after confirming your identity, the operator will give you the necessary information.

After completing all these actions, click "Save", and immediately - "Restart".

The router is connected, you can start setting up the Wi-Fi network. To do this, go to Smart Box.

We select the section "Advanced settings", which will allow us to go to the expert settings of the Smart Box. We click on the “Wi-Fi” section, in the menu of which we select the first item - “Basic parameters”.

To increase the security of the network, opposite the line "Authentication" should be set to "WPA-PSK".

If you plan to use the port for programs and games, you need to forward it - open it. We return to the Beeline Smart Box interface again.

Select the "Advanced settings" section and go to the expert settings. Next, the menu, it is at the top, you should select a section such as "Others" in it. In this section, there is an item "NAT", in the menu of which you need to select "Application Support".

In the menu that opens, select "Set user service".

On the page that opens, in the "Name" field, enter the name of the application that you are going to use through the port. This is followed by the line "Type" - the choice of the transport protocol.

Depending on the parameters recommended for the application, you need to select TCP or UDP, or both at once. After that, you need to fill in the “Start Port”, “End Port” - fill in the data for the range of ports of the application you have chosen.

If, after performing all the steps, the port remains not working, it is possible that the antivirus is blocking it. Try temporarily disabling the security system of your computer - if the port is open, then all settings are correct.

How to set up Beline Internet (beeline) on D-link, TP-link routers

geek-nose.com

Setting up a Wi-Fi router Beeline

Let's configure the Wi-Fi router to work in the network of the Beeline Internet provider using the example of Netgear WNR-612 v2. The settings are identical for most router models, so you can set up your device based on this article. Below you will find a video on setting up this router model. And in the second part of the article, a brief guide to setting up the D-Link DIR300.

First you need to connect the Beeline Internet cable to the WAN (INTERNET) port, and the patch cord connecting the Netgear router to the computer's network card to any of the LAN ports. Power supply to the outlet :) Next, launch the browser (Internet explorer, google chrome, opera, mozilla) and enter the address of our Netgear Wi-Fi router in the address bar. Next, you will need to enter a username and password to enter its settings.

See the router address on the back of the device: routerlogin.net

  • Username: admin
  • Password: password

Beeline basic settings for any router models:

  • Connection type: PPTP, better L2TP if available.
  • VPN address (access point, server address):
  • tp.internet.beeline.ru - for connection via L2TP protocol.
  • vpn.internet.beeline.ru - for connection via PPTP protocol.

09/19/12 - I decided to edit the article in order to write what will be in this video, for which it is worth watching it:

1. Basic settings for connecting a Wi-Fi router to the Internet: - choosing an access point for connecting Beeline, - filling in the basic parameters for connecting, 2. Setting up a home Wi-Fi network in a Netgear WNR612 router: - coming up with a name and a key for a wireless network, - Wi-Fi connection mode selection 3. Protecting Netgear router from hacking, changing the login password. 4. Setting up IP-TV in Neatgear Wi-Fi router without using a router

Part two. Setting up a D-Link DIR 300 router for Beeline.

The router is connected in exactly the same way as when setting up Netgear, the switching process is described in the first part of this article.

Now you need to go into the firmware of the router. To do this, you need to enter the following data:

  • router address - 192.168.1.1
  • login to access the interface - admin
  • password - admin

If you got to the Beeline quick setup page, then you need to perform just a few sequential steps to configure the router.

1. "Home Internet" - in this section you need to configure the connection to the network, all the data necessary for the connection is already in the firmware of the router, it remains only to enter the username and password for accessing the Internet in the appropriate columns. 2. "Wi-Fi" - here you need to configure the wireless network of the router. In the Network name line, enter a name, for example wifi_free, and in the Password field you need to enter a password (think up a password of 8 characters, for example, a phone number without an eight).

3. "Television" - if you are a subscriber of the "Digital TV" service, you need to select the port of the router to which you connected the set-top box. If you watch TV channels on a computer, select "Yes" in the "TV on PC" menu. 4. "Access to the router" - here you need to change the password to access the router. Next, click the "Save" button to apply the router settings.

The router will automatically connect to the Internet after the reboot, and the "Connection established" parameter will appear opposite the Connection status field. This completes the DIR300 setup with Beeline firmware.

GoodTarif.ru

Connecting a personal computer to the Wi-Fi network of the router

  1. Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop case to the appropriate position (if any) or press the key combination on the keyboard. On most laptops, this combination is Fn + one of the keys of the F row (the key number depends on the laptop manufacturer, you can identify it by the image of the Wi-Fi icon or check the instructions). An example is shown in the figure.

  1. Click "Start" -> "Network Connections". If there is no "Network Connections" item, open the "Control Panel" and go to "Network Connections" in it.

  1. In the window that appears, double-click on the "Wireless Network Connection" icon.

  1. Select the network you wish to connect to from the list of networks. If the network list is empty, click Refresh Network List. Modern routers are capable of creating two networks: If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend that you select it. If you are connected to a 5 GHz network, but the Wi-Fi range is not enough for you, switch to a 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the "Connect" button (or just double-click on the name of the desired network).

  1. If you are connecting to a secure Wi-Fi network, a window will appear requesting a network key (password) and confirming it. Enter your password, click Connect.

  1. Click Connect Networks.

  1. In the list of networks that appears, select the wireless network of your router. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend that you select it. If you are connected to a 5 GHz network, but the Wi-Fi range is not enough for you, switch to a 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the "Connect" button.

  1. Click the "Network key or passphrase will be entered" button.

  1. Enter the password for your Wi-Fi network, then click the "Connect" button.

  1. Click the "Close" button. You have successfully connected to your wireless network and can work with Beeline Home Internet.

  1. Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop case to the appropriate position (if any) or press the key combination on the keyboard. On most laptops, this is the Fn key combination + one of the F row keys (the key number depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check the instructions). An example is shown in the figure.

  1. Click on the "Start" button and select "Control Panel".

  1. In the "Network and Internet" section, select "View network status and tasks".

  1. Select "Change adapter settings".

  1. In the list of connections that appears, select "Wireless Connection". It must be enabled. If the connection status is "Disabled" - right-click on it and select "Enable". Now double-click on the wireless connection icon with the left mouse button and select the wireless network of your router in the list of networks that appears. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend that you select it. If you are connected to a 5 GHz network, but the Wi-Fi range is not enough for you, switch to a 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network, click the "Connect" button.

  1. Enter the password for your wireless network, click OK.

  1. You have successfully connected to your wireless network and can work with Beeline Home Internet.
  1. Turn on the Wi-Fi adapter on your laptop. To do this, move the Wi-Fi switch on the laptop case to the appropriate position (if any) or press the key combination on the keyboard. On most laptops, this is the Fn key combination + one of the F row keys (the key number depends on the laptop manufacturer. You can identify it by the image of the Wi-Fi icon or check the instructions). An example is shown in the figure.

  1. If you have the Windows Start screen open, go to the standard desktop.

  1. Move the mouse pointer to the lower right corner of the screen and then up. Click on the "Settings" icon.

  1. Click on the wireless network icon.

  1. In the list of connections that appears, select the wireless network of your router. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend that you select it. If you are connected to a 5 GHz network, but the Wi-Fi range is not enough for you, switch to a 2.4 GHz network (for example, Beeline_2G_XXXXXX). Select a network. For subsequent automatic connection, check the "Connect automatically" box. Click the "Connect" button.

  1. Enter the password for your wireless network. Click "Next".

  1. You have successfully connected to your wireless network and can work with Beeline Home Internet.

  1. Make sure the Wi-Fi interface is enabled. The Wi-Fi icon in the menu bar should be bright and below it should say "Wi-Fi: On" or "Wi-Fi: Searching for networks." If the Wi-Fi interface is disabled, enable it in the Wi-Fi menu.

  1. After the Wi-Fi interface is enabled, find and select your network from the list of available connections. Modern routers are capable of creating two networks:
    • at 2.4 GHz - a widespread but noisy frequency
    • at 5 GHz - faster frequency, but with a shorter Wi-Fi range
    If your computer sees a network operating at a frequency of 5 GHz (for example, Beeline_5G_XXXXXX), we recommend that you select it. If you are connected to a 5 GHz network, but the Wi-Fi range is not enough for you, switch to a 2.4 GHz network (for example, Beeline_2G_XXXXXX).
    2. How to activate the on-board computer on a Renault Duster

    How to find out who is connected to your computer on the network

Express loan in Voronezh, express loan on a card, online loan processing and a decision on issuance within 15 minutes. Take an express loan online? approval in 15 minutes cash loan loan under title. Loan up to 15,000 rubles, for 7 days free of charge. For 30 minutes. Get money in a loan express safely and quickly. Online without visiting the office, with repeated up to 30 thousand, secured by TCP up to 250 thousand. Conditions for providing a loan product in an express loan: there is a loan secured by TCP with an increased and reduced loan amount. Detailed information about the company loanexpress. Details, contact details of the support service and valid documents. A loan from an auto loan get a loan secured by title quickly and online. MFIs and financial companies online, express loans in. Apply for an instant online loan via the Internet using Lime Loan. Submit a request for funds. Loans (car pledge) are a very popular type of loans in Russia! a loan secured by title in krasnodar - quickly, conveniently, reliably! we value our clients. Loans without income certificates, secured by title and secured by real estate. The calculator provides approximate calculations. For getting. Leave an application for a loan in loanexpress, company news, MFI rating. Up to 100 thousand rubles - on the security of the title, while the car remains with. Express loan in Syktyvkar. Information about the company, details, terms of loans and express loans, customer reviews, one-click application. May 22, 2019 An express loan from a quick money company is an opportunity to receive the missing amount of money as soon as possible. Loan under title loan express loan amount: from 30,000 to 250,000 rubles. Loan term: from 30 to 356 days. Consideration time 15 minutes. Quickly get a cash loan secured by the title of the car. Choose a car loan. European Express Loan. PTS bail loan. A quick loan is a way out of many difficult financial situations. With a car, in a car pawnshop, you can take a loan secured by title. For online shopping. Rates on express cards are much higher than on regular cards. Online application for a loan secured by title fast filling out the questionnaire, instant receipt of money for a loan express loan secured by a car. In practice, not every registration without guarantors and certificates issues a loan secured by the title of a car; express cash withdrawal for 1. Loan secured by title in 6 pawnshops, electric steel: accurate 3d map 2gis, easy search by ✉ reviews, loan express, microcredit company. Favorable cash loans on the passport in the banks of Novorossiysk. Choose the best interest rates for cash loans by passport c.

Loan secured by vehicle title in cash or on a card https://www.vbr.ru › Microfinance organizations › Car loans

A quick loan is a way out of many difficult financial situations. With a car, in a car pawnshop, you can take a loan secured by title. For online shopping. Rates on express cards are much higher than on ordinary cards. Loans without income certificates, secured by title and secured by real estate. The calculator provides approximate calculations. To receive. Leave an application for a loan in the loan express, company news, MFI rating. Up to 100 thousand rubles - secured by the title, while the car remains with. Terms of the loan product in the loan express: there is a loan secured by the title with an increased and reduced loan amount. May 22, 2019 a sum of money in the shortest possible time. A loan secured by title in 6 pawnshops, electric steel: accurate 3d map 2gis, easy search by ✉ reviews, loan express, microcredit company.

Loan online https://zaims.ru

Loans (car pledge) are a very popular type of loans in Russia! a loan secured by title in krasnodar - quickly, conveniently, reliably! we value our customers.Online application for a loan secured by title, quick filling out the questionnaire, instant receipt of money for an express loan secured by a car.Favorable cash loans on a passport in Novorossiysk banks. Choose the best interest rates on cash loans according to your passport. Loan under TCP loan express loan amount: from 30,000 to 250,000 rubles. Loan term: from 30 to 356 days. Consideration time is 15 minutes. In practice, not every registration without guarantors and certificates issues a loan secured by the title of a car;; express cash withdrawal for 1.Detailed information about the loan express company. Details, contact details of the support service and valid documents. Apply for an instant online loan via the Internet using lime loan. Leave an application for receiving funds. A loan from an auto loan get a loan secured by Title quickly and online. MFIs and financial companies online, express loan in Voronezh, express loan in Voronezh, express loan on a card, online loan processing and decision on issuance within 15 minutes. Get money in an express loan safely and quickly. Online without visiting the office, with a second visit up to 30 thousand, on the security of title up to 250 thousand.

Kommersant (Monday-Friday) 40-2015 https://books.google.ru › books

Express loan in Syktyvkar. Information about the company, details, terms of loans and express loans, customer reviews, one-click application.Zaymekspress is a microfinance organization. Issued a cash loan at the company's offices! conditions for an express loan issuance under title. Go to section 2nd reason - the ability to get a large amount under to get a microloan in an express loan secured by title, the client must. MFO loan express 16 positive reviews and 54 negative reviews. Opinions of clients with and without delays about loanexpress.4 how do loanexpress collectors (zaimexpress. Ru) work? how with them the amount of money, term, type of loan (cash or secured by title). In this case, you should have only three documents with you: STS, Title and passport, as well as keys from. Money secured by Title in Moscow and the Moscow Region. Car leasing for individuals Persons to buy a car. We accept investments in the car leasing business and. Interest rates and conditions for obtaining a microloan carmoney loan. Convenient PTS pledge; Business owner. Loan term: 7 days receive cash. * the final amount of the loan can. The loan express company is rightfully considered one of the largest organizations in terms of the term (13 months) and you can use a loan secured by title. Three documents title, title, passport. Up to 90 of the estimated value of the car; loan amount from 15,000 to 10,000,000 rubles; express auto loan term. Loans secured by vehicle title By clicking the button to select a personal loan, you agree to the terms of processing. Zaimexpress.

Loan-Express - cash microloans according to the passport https://www.zaim-express.ru

Special equipment, passport with a mark on the place of registration, psm or pts. Loan express company consultant will agree with the client. May 23, 2019 Loan express from loan express terms, interest rates per day. Loan express. Rate from 1 ; the amount of the loan secured by title. Express loan secured by title without parking a car in the company's asset finance group. Money secured by a car (sub. Loans secured by a vehicle title by clicking the button to select a personal loan, you agree to the terms of processing. Get an express loan online ✓ Approval in 15 minutes ✓ First loan free of charge ✓ up to 15,000 rubles ✓ without certificates and guarantors.Basic conditions Loan amount, from 30,000 to 250,000 rubles Interest rate, from 0. Loan term, 30,365 days Security.5 this is based on if you take money for a year! Now, in order to withdraw from the account, banks from 27 take 7, this is Orient Express. a pledge of the title of a car? first of all, this service is a banking service. We issue an express loan, as well as money secured by the title of the car. And until the loan is paid, the title of the car is in the bank. It turns out more expensive than buying without a loan, Basically, auto loans are divided into two types - express and classical.

Loan Express - money loans | VKontakte https://vk.com › zaimexspressru

MFO loanexpress: microloan conditions, online application and borrower reviews + entrance earlier, the MKK also provided loans secured by title. Electronic services express check your benefits information bank information materials buy a guarantor system. a loan in Moscow on a card or. A mutually express loan secured by a title car remains with you! Now companies offer the opportunity to take a loan secured by a title, which is a vehicle passport as collateral. Ooo zaimekspress offers microcredit services under a passor loan.Express application for a loan secured by a vehicle title. Thank you for your trust. Why is it advantageous to apply to us for a loan under title? quickly. Express newspaper responds to relevant, inconvenient and take a loan secured by a car only in proven pawnshops. Opinion if a pawnshop is ready to issue money secured by title - this is a violation. A loan under title. Suspended. Suspended. Appropriate requirements for the borrower. Cash loan. Loan terms: amount: from.

A quick loan and an urgent loan secured by a car PTS... https://avtolombard-credit.ru › pages › express

Loans secured by the title of a car in Yuzhno-Sakhalinsk from the IFC or MCC (MFO), then you will need to select the loan amount, term and fill out a questionnaire. A cash loan in which the car remains with you. Take a loan according to your passport, without certificates and guarantors! preliminary decision in 5 minutes. Receiving money on the day of treatment. A more substantial amount is required, express loans for auto loans under TCP are very convenient - you get money and, of course, there are some restrictions - in order to take a similar one. , loans in balashikha addresses, loan center balashikha, express loans balashikha. Auto at the same time loan express.

Loan Express, loans in MFIs, Sverdlovsk region... https://zaimgrad.ru › Sukhoi Log

Changing the parameters of the Beeline router is done in its web interface. You can access it after going to the address indicated on a special sticker. For 4G routers, it is located under the battery. The password used for authorization is also located there.

The interface of the router control panel is made in the style of Metro. Among its features, one can single out integration with SIM card data. Right in the browser, you can view and edit messages and contacts stored in the SIM memory. The start page also contains a section with current connection settings. The top right corner displays the current battery level, Wi-Fi reception and SIM card status.

Important! Beeline MF90 routers support two connection technologies: 3G and 4G.

Beeline service management

To go to the user's personal account, you will need to receive an SMS with an access password. You can request a message in the corresponding section "Personal Account". Changes to settings are made on the external site.

The "Services" section provides the ability to change additional properties of the connection. In this case, USSD commands are used, which must be entered in a special text field. You can get acquainted with the list of available services on the website of the Beeline operator.

Setting up the connection and Wi-Fi

Go to "Settings -> Network". Autostart is set by default: the connection is established every time the Beeline router is turned on. You can change this value if necessary, but in this case you will need to log in to the web interface each time to connect. Also in this tab, you can choose whether you need a roaming connection.

Note! Tariffication of the Internet in roaming differs from the cost of using it within the Russian Federation.

To change the wireless network settings, go to the "Wi-Fi" section. Here you can set the name of the network, select the type of encryption and set the password used to connect. The "Access Point Isolation" parameter is responsible for the local connection. After turning it on, the devices will be able to connect to the Internet, but there will be no possibility of data transfer between them. The "Transmit network name" field is responsible for the visibility of Wi-Fi. When set to Disable, Wi-Fi will be hidden. You can limit the number of connected devices in the Maximum Connections section.

Important! For maximum network security, use letters, numbers, and special characters in your Wi-Fi password.

Advanced Wi-Fi options are available under Advanced Settings. Most 3G / 4G routers from this provider support dual band operation: 2.4 GHz and 5 GHz. But unlike home routers, simultaneous operation of two networks at different frequencies is impossible. It is recommended to select 5 GHz frequency if all your devices can work on it. This will allow you to get a higher data transfer rate and noise immunity. The rest of the values ​​on this page can be left unchanged.

Recommend other articles

Public base of telephone exchanges of the world

Public base of telephone exchanges of the world

"Worms" and other digital creatures: how the most dangerous viruses appeared