Beeline internet Wi-Fi connection. Correct configuration of Beeline routers. Setting up an Internet connection in routers with D-Link firmware

Setting up a Beeline Wi-Fi router does not have to be done by a specialized technician. If you follow certain rules, you can configure it yourself, which will take you no more than 10-15 minutes.

Wi-Fi router - specifics of device settings

The most popular models of modern routers include D-Link, Asus, Zyxel, as well as TP-Link, which work with the Beeline provider. Internet setup of the router of these models is quite simple and will not take you much time and effort.

Setting up an Internet network connection on routers consists of several steps:

• connecting the router to the PC;
• login to the setup system;
• setting optimal router configurations;
• connecting additional router capabilities;
• saving parameters.

Depending on the selected device model, the process of setting up and connecting to the Internet may differ. Let's look at the process of setting up individual router models step by step.

If you have previously made changes or you have changed your login parameters and cannot remember them, you need to return the device settings to their defaults.

To do this, you need to hold down the “reset” button, which is located near the device’s power cable, for 5 seconds.

When you log in for the first time, you will be greeted by a quick configuration wizard that will help you quickly select the optimal settings for your router.

If you want to figure out the router settings yourself, you don’t have to use the automatic setup wizard. To do this, you need to immediately select the second group of the main menu “Manual Settings”.

Setting up the Beeline DIR-300 router - features and tips for proper connection

The D-Link DIR-300 Wi-Fi router is the most common Wi-Fi router model with a stylish, modern design. The model is designed for 24-hour operation and provides round-the-clock connection to high-speed Internet.

The technical features of the router of this model include:

• Wi-Fi connection type - 802.11b/g/n;
• data transfer speed - up to 300 Mb/sec;
• number of built-in antennas - 2;
• available connectors - 4 x RJ-45 (LAN), 1 x RJ-45 (WAN);
• Dimensions - 126.5 mm/180 mm/32 mm.

The first thing you need to do when setting up a router is to connect the provider cable and establish a connection with your personal computer. In addition, it would be a good idea to check your device for viruses by scanning it with an anti-virus program installed on your computer.

The next step is to enter the settings system.

To open the settings window you need:

• enter the standard IP address of the router into the browser line, which is 192.168.0.1;
• when prompted to log in, enter your login and password, which, according to the standard device settings, is provided as the following parameters: login - admin, password - admin (these parameters can be found on the router box);
• In the future, you can change these values ​​at your own discretion.

After entering the menu, you will be offered several categories of working with the router: manual setup, setup wizard, checking the connection with a PC, setting up IPTV, setting up Wi-Fi and others.

Manually setting up the Beeline DIR-300 router requires entering all the configurations necessary for connection and normal operation of the device. After entering the “Manual Configuration” menu, you must select the “Network” tab, in which specify the “L2Tp + Dynamic IP” parameters as the connection type. In this menu you can also specify the connection name, login and password of your Beeline Internet. In the line “VPN Address” we indicate the standard address of the Beeline server - tp.internet.beeline.ru. After saving the specified settings, you will be able to see the created connection in the “WAN Connections” tab.

The next step in configuring the DIR-300 router is to configure the created connection. The main settings are setting a password for the connection, as well as setting the name of the access point.

After successfully entering the specified parameters, the installation of the Internet connection will be completed, and the router will be completely ready for use.

Wi-Fi routers from Beeline - key points and features of setting up different models

For owners of Beeline routers, setting up the Internet should not cause problems. The provider tried to make it as simple and fast as possible. The Beeline Wi-Fi router is configured according to the same type of scheme, indicating the standard provider data.

Standard values ​​for connection connection:

• WAN connection type - L2TP;
• the user name is equal to the provider's payment number;
• password - standard value set by the provider (admin);
• VPN server parameters - tp.internet.beeline.ru.

However, each router model has its own characteristics, and therefore, the process of setting up devices may have slight differences.

Key points for configuring Asus router settings

One of the popular modern routers is Asus. Thanks to the efforts of the provider, setting up the Asus Beeline router has acquired an automatic process of searching for the most optimal configurations, thanks to a convenient settings wizard program.

As a rule, upon completion of work, the configuration wizard sets all the settings independently, but often it may be necessary to configure it manually. Therefore, it is necessary to know the key points of this process. Let's look at the features of setting up the Beeline router with standard firmware 3.0.0.x.

After connecting the Internet cable to the computer (the Internet cable is in the blue port, the Patchcort is in the yellow port), you need to connect the other end of the Patchcord to the PC’s network card, and also check that the settings of the card itself are correct. After successful connection, log in to the router. To do this, you must enter the value of the provider's IP address (192.168.1.1) in the browser line. After entering the standard login and password values, you will have access to the device settings menu.

In the “Internet” section, you must enter the standard data for connecting the connection provided by your provider.

Unlike routers of other models, the Asus router requires setting up a dynamic address, which is a distinctive feature of this device.

To obtain dynamic IP address parameters you need:

• open the “Internet Settings” tab in the router settings;
• check the “Enable connection” checkbox;
• select “INTERNET” type, “IP Routing” service type, “DHCP” addressing.
• save the specified settings.

TP-Link router - what you need to know for proper connection

Another popular router model is TP-Link. This router is a practical model of a budget device with support for 3G and Wi-Fi 802.11n with the support of the Beeline provider.

Setting up a TP-Link router — This is a fairly simple process that won't take you much time. The TP-Link router is in many ways similar to the Zyxel Keenetic router, therefore, the configuration process has similar parameters.

You can use a special automatic configuration wizard, which will automatically determine and set the optimal router parameters for connecting to the network. The manual process uses standard data provided by the provider.

TP-Link and Zyxel Keenetic routers - distinctive points

An important point in setting up Zyxel Keenetic is the L2TP connection. If in the case of the TP-Link router we can say that the procedure is mostly performed automatically, then in the case of the Zyxel Keenetic it is best to enter the data manually without using the Beeline settings wizard. Setting up a Zyxel Keenetic router involves creating two separate connections - Dynamic IP and a VPN connection.

The first connection is standard and is necessary for the operator’s internal network. To configure the second one you need:

• go to the VPN menu tab;
• check the box next to “Enable L2TP LAC”;
• in the “LNS address” field you need to enter the Beeline server name - tp.internet.beeline.ru.

In the lines below with the value “PPP Username” and “PPP Password”, enter the values ​​you have chosen for authorization. Make sure Connection Mode is set to Auto. Don't forget to save the specified configurations.

"Beeline" - setting up a router and installing special features

A Wi-Fi router can be an excellent option for connecting high-speed Internet at home, as well as high-quality digital television IPTV.

To set up IPTV on your router you need:

• go to the “IPTV Service” section;
• check the box next to “IPTV Enable”;
• select from the list of Lan Interface ports the port to which TV4 will be connected;
• set the connection type to “Bridge Mode”;
• set the value “4” in the “802.1P” field;
• save settings.

Firmware for Beeline router yourself

Based on the features of the installed Beeline firmware, setting up the router may include various additional parameters.

Additional firmware for the device can help eliminate some malfunctions and operational errors, as well as expand its capabilities. In order to change the standard firmware, you need:

• download the updated firmware version;
• connect the device to the computer;
• enter the settings panel;
• open the “Maintenance” tab;
• select “Software Update”;
• select the file for firmware (downloaded software version);
• click the “Update” button and wait for the update to complete;
• check the settings, connect the provider cable.

Setting up a Beeline WiFi router does not have to be done by a specialized technician. If you follow certain rules, you can configure it yourself, which will take you no more than 10-15 minutes.

Many users have a question - how to set up a D-Link Dir Wi-Fi router for Beeline? After reading these instructions, you will be able to configure your router to work with the Beeline Internet provider. Setup will not take more than 10 minutes.

Beeline Internet provider uses L2tp connection type, which reduces the load on serving equipment, unlike PPoE or PPTP connections.

Before we begin setting up the Dlink router itself, we will need to correctly configure the network card of our personal computer. Setting up a network card for Windows Xp, Windows 7, Windows 8 takes a few simple steps (it is advisable to update the firmware to the latest version. The current firmware version is indicated on the sticker located on the bottom of the router)

Setting up a network card:

1. Let's go to " Start", select from the drop-down list " Control Panel"/Click on the shortcut " Network connections»
2. Next, you should click on “ Local network connection"/select " Internet protocols TCP/IP» /« Properties"/Remove the "tick" from the phrase that ends with the word "automatically"

1. Next, go to “Start”/Control Panel/Network and Internet Center, Network and Sharing Center/select “Change adapter settings”
2. Click on “Local Area Connection”/select “Properties”/select “Internet Protocols Version 4 (TCP/IPv4)”.
3. Place the checkboxes as indicated in the image

We connect our router to the network card

To connect, you must insert the network cable of the Beeline Internet provider into the “Internet” port, which is located on the back panel of the router. We connect the cable that came with our device to any of the “LAN” ports (rear panel), and the other end to the network card of our personal computer.

After we have connected the device to the PC, we should enter its settings. To do this, open your Internet browser (Mozilla, Opera, Chrome, etc.) and enter the IP address of our router in the address bar of the browser: 192.168.0.1, after which an authorization pop-up window will appear on the screen. In the login and password field you should enter the word “ admin" and press the Enter button.

1. Click on the link “Advanced settings”/“WAN”
2. On the page that opens, enter our data to connect to the Beeline Internet (login and password are specified in the contract)
3. Next, select the connection type “ L2TP + Dynamic IP»
4. Enter “VPN server address” - tp.internet.beeline.ru
5. After entering all the data, click on the “Change” button

SettingsWi-Fi for the D-Link router Deer for the Internet provider Beeline

1. Click on the “Advanced settings” link again
2. Click on the Wi-Fi link
3. Select the menu item “Basic settings”
4. Configure “SSID” (the name of your Wi-Fi network - enter any)
5. Click on the “Change” button
6. Go to “Security Settings”, where you should set a password for your new Wi-Fi network.

To set up IPTV, you will need to read the article, which you will find by following the link.

The setup has been completed successfully. Now you know how to set up a D-Link Dir Wi-Fi router for Beeline.

Video settings of the D-Link Dir router for Beeline

The Beeline company has long established itself as the best home Internet provider. This article will discuss the step-by-step setup of a Beeline Wi-Fi router, which will allow you to set up your home Wi-Fi yourself, without the help of a third-party specialist.

You need to worry about connecting a router after the company’s technicians install a cable into your apartment, thanks to which you can access high-speed Internet. All that remains is to correctly configure the link that will connect your computer and cable, allowing you to freely roam the vastness of the World Wide Web.

Plug the cable into the WAN port of your router. Also, for the initial setup, you will need the cable that comes with the router to connect the computer and modem. Connect the modem itself to the network using the included power supply.


Open any internet browser. It doesn't matter whether it's a standard browser (Internet Explorer) or any third-party browser (Opera, Mozilla Firefox, Chrome, etc.).

Enter the following address in the address bar without quotes and press the Enter key: “192.168.10.1”.

A window will open in which the system will ask you to enter your username and password. Enter the word “admin” in both columns and click OK.

Next, the web interface of the Beeline router itself will open, where you need to change some parameters. First you need to change your connection settings. To do this, go to the “Basic Settings” section and click on the “WAN” item.

Enter the following parameters:

— Connection type – L2TP

— IP address/Server name – tp.internet.beeline.ru

— Username – enter the desired login

— Password – set a password using numeric and alphabetic values

— Address type – dynamic

- MTU - 1460

Check the box next to “Obtain DNS automatically” and apply the settings by clicking the “Save changes” button.

The router will make new settings for some time. As a rule, this will take no more than 1-2 minutes, after which the following message will appear on your monitor: “Settings changes were successful.” Click OK to close the window.

Select the Wi-Fi Settings tab. All the basic settings of your router are reflected here.

Check the following settings:

— Turning off the wireless network - if you plan to use the Internet via a Wi-Fi network, then there SHOULD NOT be a check mark next to this item.

— Standard – 2.4GHz (B+G).

— Mode – AP.

— Wireless network name – select the desired name.

— Channel number – Auto.

After making new settings, click the “Save Changes” button.

After a few seconds, the router will save your changes. Your router is almost ready to use.

Let's move on to ensuring the security of your wireless network, which will protect you from intruders, and for this you need to encrypt it.

Without leaving the “Wi-Fi Settings” section, open the “Security” item.

A new page will open where you need to make the following settings:

— Authentication – WPA2 mixed.

- WPA encryption - TKIP.

- WPA2 encryption - AES.

— Preset key format – password.

“Preset key” – enter the desired password, which will contain at least eight characters. It is allowed to use small and large case letters of the Latin alphabet, numbers and special characters (!”№;%:, etc.) as symbols.

To complete the router settings, click “Save changes”.

Now you can freely surf the vastness of the World Wide Web, forgetting about wires.

Wi-Fi routers from Beeline are becoming increasingly popular among active network users. Setting up a router only at first glance looks like a complicated process. In fact, anyone can cope with the connection and settings using special tips.

Proper connection of a Wi-Fi router

If you want to save money, you can connect and configure your Beeline router yourself. To do this, you first need to connect the patch cord with one end to the LAN port on the router, and the other end to the network card of your computer. After this, you need to open the browser that you usually use, and in the window that opens, enter the IP address number in the address bar. It is standard for everyone: 192.168.1.1.

A special window should pop up on the monitor in which you need to enter your login information and password. Please note that this data may be indicated in the instructions for the router. If you do not find them, then you need to enter the standard combinations for all: login - admin and password - admin. After that, click “Login”.

Setting up a Beeline Wi-Fi router

The setup is done by entering the “Setup -> Basic Settings” menu. Here in the “Server Address” column you should enter tp.internet.beeline.ru, in the “Connection Type” item we indicate L2TP, and the MTU is set to 1400. After that, we save all the selected settings, the waiting time will be no more than a minute.

Now you need to configure your wireless network. This must be done manually by entering the menu and selecting “Wireless network -> Basic settings”. Here you need to fill in all the parameters as follows:

1. “Network name” - indicate the name of your network.
2. “Transfer SSID” - check the enable box.
3. In “Network mode” select “Mixed”.
4. The “Channel Width” parameter is set to automatic.

How to update a Beeline router

Updating a router involves updating its firmware. To do this, just download it from the Internet. Then we follow a few simple steps. Select the path “Administration -> Firmware Update -> Overview”. Here you need to select the firmware file that you previously downloaded to your computer and click the “Start Upgrade” button. After a short wait, a window should appear indicating that the update is complete.

All cellular companies offer access to the worldwide network, but Internet access from the Beeline provider is considered one of the most popular options. The operator provides its consumers with both mobile and home Internet.

To obtain wireless Wi-Fi coverage, branded routers from other manufacturers are used, the settings of which vary depending on the device model. Our article today will tell you exactly how to connect a Beeline router.

If several computers are used in one house, then setting up Wi-Fi becomes more than relevant. Wireless Internet access is extremely convenient when working with modern smartphones, tablet PCs or laptops. Setting up Internet access through a router can be done automatically or manually, which directly depends on the model of the device used.

Basically, when signing an agreement with the Beeline provider, a company specialist comes to the new client’s home and sets up the correct connection. But if the Wi-Fi router was purchased later, or the device was replaced, the connection will need to be configured again.

Each router has its own guide for entering settings, but the individual steps are absolutely identical for all devices, for example:

1. Connecting the cable to the router itself.
2. Connecting the second cable directly to your laptop or PC.
3. Entering the correct settings (device address, type of connection used, setting a password, etc.).

How to set up a D-Link DIR-300 router

There are well-known router models that are used by the majority of all consumers. This is exactly the model DIR-300 is. Few subscribers choose devices without Wi-Fi, because, basically, this is the only reason the model is purchased.

Setting up a D-Link DIR device is carried out in two stages:

1. Physical connection (Fig. 1).
2. Managing the created connection via the browser.

First, you need to make sure that your network adapter has the latest driver installed. This mostly applies to owners of old PCs.

1. You need to unpack the device and connect the power supply to it, and then connect the cable to the port labeled WAN. The second cable is connected to any LAN port on the router and, accordingly, to the computer.
2. Next, the subscriber needs to open the “Start” tab on the PC and go to the section "Control Panel", and then enter "Network Control Center". Here you need to click on the column "Adapter Settings" and set the protocol version to line “4”, and then open “Properties”.
3. The user needs to make sure that the “IP” and “DNS Server” items are in the "Automatically".
4. Then the subscriber needs to go to the internal menu. To do this, you need to enter the value 192.168.1.1 in the browser line and confirm the transition. A special form will appear in which you need to enter your login and security password. To get to the admin panel, you need to enter the word “Admin” in both lines. This is the factory method for gaining access.
5. In the interface that appears, you need to select the item "Manual settings", enter the “Network” section and click on the “Add” button.
6. Then set the connection type to “L2TP”, and set the IP to “Dynamic”.
7. In the fields that appear, enter the client login and security password. They are issued by Beeline when purchasing a router.
8. Then you need to check the boxes next to the items "Automatic connection" and “Keep Alive”, and then press the “Save” key.
9. Press the “Save” button again, after which the connection will be made automatically.

That's it - the router is configured.

Asus devices

Another well-known router manufacturer is Asus. The disk included with the device does not contain a utility for obtaining settings automatically, and therefore the subscriber will have to enter all the parameters manually.

ASUS router

You must enter the settings for the Asus router as follows:

1. The device must be connected to the network and connected directly to the PC using the included cable.
2. Then you need to open any browser and enter the value 192.168.1.1 into the search bar, and then press enter.
3. To gain access, the user needs to enter a login and a security password - the word “Admin” must be entered in both fields.
4. After entering the internal interface, you need to go to the tab called “Advanced Settings” and select the “WAN” column. Then set the connection type to “L2TP” and make sure that the “IP” and “DNS Server” items are set to "Automatically". In the “VPN Server” field we enter the following address – tp.internet.beeline.ru. You also need to enter your own login and security password - they are issued to the subscriber when purchasing a router.
5. To activate Wi-Fi you need to go to the “Network Map” tab.
6. A table with the configuration for a quick wireless connection will appear on the right side. The following parameters must be entered here: "Connection name"- come up with anything; “Protection type” – WPA auto; “Encryption WPA” – enter “TKIP+AES”. In the “Password” field, you need to enter any one you come up with, if necessary. Then click on "Confirmation". Now the router is fully configured and ready to go.

This completes the configuration of the router for Beeline.

TP-Link devices

This device model is quite popular and in demand due to the fact that it has an installation wizard that can connect to the network automatically. Basically, a disk is supplied with the router, on which the master is located. The user only needs to connect the device to the PC, insert a disk into it and launch it. If, for unknown reasons, the connection could not be established, then there is only one way out - entering parameters manually.

Router TP-Link

The device is configured as follows:

1. After connecting the router to the PC, the subscriber needs to go to any browser and enter the value 192.168.1.1 in the line, and then press enter.
2. Next, go to the “Network” tab and open the “WAN” column.
3. Then we set the connection type to “L2TP”, enter our login and security password, which was issued by the provider when purchasing the router, and for the IP server we enter the following address - tp.internet.beeline.ru.
4. We indicate “Automatic connection” and for “MTU” we set the value to 1400. Then click on the “Save” button.
5. To activate Wi-Fi, you need to go to the “Wireless” section and open the “Settings” column.
6. Next, we come up with a name for the network being created, set the region to Russia, and also set the value for the “Channel” and “Mode” items "Automatically". Click on “Save”.
7. Next, go to the “Wireless Security” section and activate the “WPA-PSK” item. For all other points we set the value "Automatically". Press the “Save” button. The router is now fully configured.

Zyxel devices

Some customers prefer to use devices from the manufacturer Zyxel. Let's look at how to set up a router from this company. They connect to the computer in the same way as the above devices. But the internal configuration is carried out in this way:

Zyxel router

1. Go to the browser and enter the value 192.168.1.1 in the line.
2. In the fields for login and security password, enter the word “Admin”.
3. Then go to the “Internet” tab and click on the “Connection” column.
4. Next, fill in the following items: the name of the Internet center - enter any; We set the “IP” and “DNS Server” items to the mode "Automatically"; Opposite the item “Ping requests”, check the box and set the UPnP value to “Allow”. Click on the “Apply” button.
5. Then go to the “Authorization” tab and set the connection type to “L2TP”, and for the server we register the following address - tp.internet.beeline.ru. In the login and security password fields we enter the access that was given when purchasing the device. Click on the “Save” button.
6. To activate Wi-Fi, you need to go to the “Wi-Fi Network” section and select “Connection”. Then check the box next to the item "Connection Points" and come up with a name for the new network. The field called "SSID" is not filled in. We set the standard to 802.11g/n. We switch the next two sections to mode "Automatically". Click on “Application”.
7. Next, go to the “Security” tab and set the value to “WPA-PSK” for authentication, and set the value to ASCII for the format. If necessary, we come up with a password for the network. At the end, click on the “Apply” button. Now our router is fully configured and ready for the first connection.

Conclusion

We looked at all the most popular models of routers for Internet access from the Beeline cellular company, and also talked about how to connect them and configure them correctly.

In fact, setting up a Beeline router should not cause any problems for users. All that is needed is just to repeat all our actions in practice and a positive result will not take long to arrive.